CS1D-DPL02D Omron, CS1D-DPL02D Datasheet - Page 212

• Manufacturer Part Number: CS1D-DPL02D
• Description: CS1D Dual IO Exp
• Manufacturer: Omron

Specifications of CS1D-DPL02D

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

CS-series 96-point I/O
Units
Wire Sizes
Wiring Procedure
Wiring Methods
1,2,3...
Note Solder-type connectors are included with each Unit.
The following connectors are recommended for attachment to CS-series 96-
point I/O Units.
We recommend using cable with wire gauges of AWG 28 to AWG 26
(0.2 mm
max.
1. Check that each Unit is installed securely.
2. Do not remove the protective label from the top of the Unit until wiring has
3. When solder-type connectors are being used, be sure not to accidentally
Solder-type
(included with Unit)
Crimp-type
Crimp-type
Note Do not apply excessive force on the cables.
been completed. This label prevents wire strands and other foreign matter
from entering the Unit during wiring. (Remove the label after wiring has
been completed to allow air circulation needed for cooling.)
short adjacent terminals. Cover the solder joint with heat-shrink tubing.
Connection
2
Before wiring
to 0.13 mm
56
56
56
Pins
2
). Use cable with external wire diameters of 1.61 mm
CS1W-CE561
CS1W-CE562
CS1W-CE563
OMRON set
After wiring
Socket: FCN-361J056-AU
Connector bar: FCN-360C056-J3
Socket: FCN-363J056
Connector bar: FCN-360C056-J3
Contacts: FCN-363J-AU
FCN-367J056-AU/F
Fujitsu parts
Remove label
after wiring
Section 5-4
177