CS1D-DPL02D Omron, CS1D-DPL02D Datasheet - Page 102

• Manufacturer Part Number: CS1D-DPL02D
• Description: CS1D Dual IO Exp
• Manufacturer: Omron

Specifications of CS1D-DPL02D

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Reading and Replacing Program Files during Operation
Backing Up or Restoring CPU Unit Data or Data for Specific Units and Boards
EM File Memory
Reading/Writing EM File Memory Files Using Programming Device
File Memory
1,2,3...
1,2,3...
1,2,3...
1,2,3...
Note The following files can be transferred between the Memory Card and the CX-
1. Install a Memory Card into the CPU Unit.
2. Set the following information: Program File Name (A654 to A657) and Pro-
3. Next, from the program, turn ON the Replacement Start Bit (A65015).
1. Install a Memory Card into the CPU Unit.
2. Turn ON pin 7 and turn OFF pin 8 on the DIP switch.
3. To back up data, press and hold the Memory Card Power Supply Switch
Programmer.
1. Insert a formatted Memory Card into the CPU Unit.
2. Place the CX-Programmer online and use the file transfer operations to
1. Convert the part of the EM Area specified by the first bank number into file
2. Initialize the EM file memory using a Programming Device.
3. Name the data in the CPU Unit and save in the EM file memory using the
4. Read the EM file memory files to the CPU Unit using the Programming De-
Program files
Program files
Data files
Parameter files
Unit/Board
backup files
Symbols file
Comment file
Program files
I/O memory files
Parameter files
gram Password (A651).
for three seconds. To restore data, turn ON the PLC power.
transfer the above files from the personal computer to the PLC or from the
PLC to the personal computer.
memory in the PLC Setup.
Programming Device.
vice.
File
File
File
File
BACKUP.OBJ
BACKUP.IOM
BACKUPIO.IOR
BACKUPDM.IOM
BACKUPE@.IOM (@= EM bank No.)
BACKUP.STD
BACKUP@@.PRM (@@= unit No.)
SYMBOLS.SYM
COMMENTS.CMT
File name and extension
File name and extension
File name and extension
File name and extension
.OBJ
.OBJ
.IOM
.STD
Memory Card to CPU Unit
Between CX-Programmer and
Memory Card
Data transfer direction
CPU Unit to Memory Card
(when backing up)
Memory Card to CPU Unit
(when restoring)
Data transfer direction
Between CPU Unit and EM
file memory
Data transfer direction
Data transfer direction
Section 2-5
67