CS1D-DPL02D Omron, CS1D-DPL02D Datasheet - Page 493

• Manufacturer Part Number: CS1D-DPL02D
• Description: CS1D Dual IO Exp
• Manufacturer: Omron

Specifications of CS1D-DPL02D

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Replacing the Duplex Unit
458
2. Remove the Duplex Unit. Verify that the new Duplex Unit’s DPL Switch is
3. Verify that the new Duplex Unit’s LEFT CPU and RIGHT CPU Operating
The standby CPU will also stop
(power OFF) when the DPL
Switch is set to NO USE.
Note Once the DPL Switch is set to NO USE, the power to the Duplex
set to NO USE and mount the new Duplex Unit.
Note When removing and mounting the Unit, move the Unit smoothly so
Switches are both set to USE (supply power to the CPU Units).
Standby CPU
Standby CPU
CPU
Unit will remain OFF even if the DPL Switch is switched to USE un-
less the Duplex Unit has been removed. If you want to restart the
same Duplex Unit, remove the Duplex Unit, mount it again, and pro-
ceed to step 4.
that it is not disconnected/reconnected repeatedly. After mounting
the Unit, secure it by tightening the mounting screws to the proper
torque.
Duplex Unit
Active CPU
The active CPU will continue
operating independently.
Active CPU
CPU
Verify that the new Duplex Unit's DPL Switch
is set to NO USE before mounting the Unit.
Set the DPL Switch to NO USE.
DPL
DPL
Verify that all of the Duplex Unit's
LED Indicators are OFF.
NO USE
USE
NO USE
USE
Section 11-7
DPL
NO USE
USE