US38024-BAG1 Renesas Electronics America, US38024-BAG1 Datasheet - Page 176

• Manufacturer Part Number: US38024-BAG1
• Description: DEV EVALUATION KIT H8/38024
• Manufacturer: Renesas Electronics America
• Series: H8®r
• Type: MCUr

Specifications of US38024-BAG1

• Contents: 2G (Second-generation) Evaluation Board, HEW debugger support, Cable and CD-ROM
• For Use With/related Products: H8/38024
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Section 6 ROM
6.3.2
• Use the specified programming voltage and timing.
• Make sure the index marks on the PROM programmer socket, socket adapter, and chip are
• Avoid touching the socket adapter or chip while programming, since this may cause contact
• Take care when setting the programming mode, as page programming is not supported.
• When programming with a PROM programmer, be sure to specify addresses from H'0000 to
Rev. 8.00 Mar. 09, 2010 Page 154 of 658
REJ09B0042-0800
The programming voltage in PROM mode (V
permanently damage the chip. Be especially careful with respect to PROM programmer
overshoot.
Setting the PROM programmer to Renesas specifications for the HN27C101 will result in
correct V
properly aligned. If they are not, the chip may be destroyed by excessive current flow. Before
programming, be sure that the chip is properly mounted in the PROM programmer.
faults and write errors.
H'7FFF. If programming is inadvertently performed from H'8000 onward, it may not be
possible to continue PROM programming and verification. When programming, H'FF should
be set as the data in address area H'8000 to H'1FFFF.
Programming Precautions
PP
of 12.5 V.
PP
) is 12.5 V. Use of a higher voltage can