SAM9X25 Atmel Corporation, SAM9X25 Datasheet - Page 455

• Manufacturer Part Number: SAM9X25
• Manufacturer: Atmel Corporation

Specifications of SAM9X25

• Flash (kbytes): 0 Kbytes
• Pin Count: 217
• Max. Operating Frequency: 400 MHz
• Cpu: ARM926
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 105
• Ext Interrupts: 105
• Usb Transceiver: 3
• Usb Speed: Hi-Speed
• Usb Interface: Host, Device
• Spi: 2
• Twi (i2c): 3
• Uart: 7
• Can: 2
• Lin: 4
• Ssc: 1
• Ethernet: 2
• Sd / Emmc: 2
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 12
• Adc Resolution (bits): 10
• Adc Speed (ksps): 440
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 32
• Self Program Memory: NO
• External Bus Interface: 1
• Dram Memory: DDR/LPDDR, SDRAM/LPSDR
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 0.9 to 1.1
• Fpu: No
• Mpu / Mmu: No/Yes
• Timers: 6
• Output Compare Channels: 6
• Input Capture Channels: 6
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: No

• CAS: CAS Latency
The reset value is 2 cycles.
• DLL: Reset DLL
Reset value is 0.
This field defines the value of Reset DLL.
0 = Disable DLL reset.
1 = Enable DLL reset.
This value is used during the power-up sequence.
Note: This field is found only in DDR2-SDRAM devices.
• DIC/DS: Output Driver Impedance Control
Reset value is 0.
This field defines the output drive strength.
0 = Normal driver strength.
1 = Weak driver strength.
This value is used during the power-up sequence. This parameter is found in the datasheet as DIC or DS.
Note: This field is found only in DDR2-SDRAM devices.
• DIS_DLL: Disable DLL
Reset value is 0.
0 = Enable DLL
1 = Disable DLL
Note: This field is found only in DDR2-SDRAM devices.
• OCD: Off-chip Driver
Reset value is 7.
Note: OCD is NOT supported by the controller, but these values MUST be programmed during the initialization sequence.
11054A–ATARM–27-Jul-11
11054A–ATARM–27-Jul-11
CAS
000
001
010
011
100
101
110
111
DDR2 CAS Latency
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
3
SDR CAS Latency
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
2
3
SAM9X25
SAM9X25
455
455