D13007VX13V Renesas Electronics America, D13007VX13V Datasheet - Page 490

• Manufacturer Part Number: D13007VX13V
• Description: MCU 3V 0K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of D13007VX13V

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 13MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 35
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

13. Serial Communication Interface
Rev.5.00 Sep. 12, 2007 Page 460 of 764
REJ09B0396-0500
Note: In simultaneous transmitting and receiving, the TE and RE bits should be cleared to 0 or
Set RIE, TIE, TEIE, and MPIE bits
Set CKE1 and CKE0 bits in SCR
Select communication format
Set TE or RE bit to 1 in SCR
set to 1 simultaneously.
(leaving TE and RE bits
Clear TE and RE bits
1-bit interval elapsed?
<End of initialization>
Start of initialization
Set value in BRR
cleared to 0)
to 0 in SCR
in SMR
Figure 13.4 Sample Flowchart for SCI Initialization
Yes
Wait
No
(1)
(2)
(3)
(4)
(1)
(2)
(3)
(4)
Set the clock source in SCR. Clear the
RIE, TIE, TEIE, MPIE, TE, and RE bits to
0. If clock output is selected in
asynchronous mode, clock output starts
immediately after the setting is made in
SCR.
Select the communication format in SMR.
Write the value corresponding to the bit
rate in BRR.
This step is not necessary when an
external clock is used.
Wait for at least the interval required to
transmit or receive one bit, then set the
TE or RE bit to 1 in SCR. Set the RIE,
TIE, TEIE, and MPIE bits. Setting the TE
or RE bit enables the SCI to use the TxD
or RxD pin.