D13007VX13V Renesas Electronics America, D13007VX13V Datasheet - Page 183

• Manufacturer Part Number: D13007VX13V
• Description: MCU 3V 0K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of D13007VX13V

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 13MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 35
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

6.5.9
When an access is made to DRAM space designated as a 16-bit-access area in ABWCR, column
address strobes (UCAS and LCAS) corresponding to the upper and lower halves of the external
data bus are output. In the case of × 16-bit organization DRAM, the 2-CAS type can be connected.
Either PB4 and PB5, or HWR and LWR, can be used as the UCAS and LCAS output pins, the
selection being made with the CSEL bit in DRCRB. Table 6.8 shows the CSEL bit settings and
corresponding output pin selections.
When an access is made to DRAM space designated as an 8-bit-access area in ABWCR, only
UCAS is output. When the entire DRAM space is designated as 8-bit-access space and CSEL = 0,
PB5 can be used as an input/output port.
Note that RAS down mode cannot be used when a device other than DRAM is connected to
external space and HWR and LWR are used as write strobes. In this case, also, an idle cycle (Ti) is
always inserted when an external access to other than DRAM space occurs after a DRAM space
access. For details, see section 6.9, Idle Cycle.
Table 6.8
CSEL
0
1
Figure 6.19 shows the control timing.
Byte Access Control and CAS Output Pin
CSEL Settings and UCAS and LCAS Output Pins
UCAS
PB4
HWR
LCAS
PB5
LWR
Rev.5.00 Sep. 12, 2007 Page 153 of 764
REJ09B0396-0500
6. Bus Controller