DF2339VFC25V Renesas Electronics America, DF2339VFC25V Datasheet - Page 457

• Manufacturer Part Number: DF2339VFC25V
• Description: IC H8S/2300 MCU FLASH 144QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2339VFC25V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 106
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 4x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-QFP
• For Use With: EDK2329 - DEV EVALUATION KIT H8S/2329
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

9.15.4
Port E has a built-in MOS input pull-up function that can be controlled by software. This MOS
input pull-up function can be used in modes 4, 5, and 6 when 8-bit bus mode is selected, or in
mode 7, and can be specified as on or off on an individual bit basis.
When a PEDDR bit is cleared to 0 in mode 4, 5, or 6 when 8-bit bus mode is selected, or in mode
7, setting the corresponding PEPCR bit to 1 turns on the MOS input pull-up for that pin.
The MOS input pull-up function is in the off state after a reset, and in hardware standby mode.
The prior state is retained in software standby mode.
Table 9.29 summarizes the MOS input pull-up states.
Table 9.29 MOS Input Pull-Up States (Port E)
Modes
7
4 to 6
Legend
Off:
On/off: On when PEDDR = 0 and PEPCR = 1; otherwise off.
MOS input pull-up is always off.
MOS Input Pull-Up Function
8-bit bus
16-bit bus
Reset
Off
Hardware
Standby Mode
Off
Rev.4.00 Sep. 07, 2007 Page 425 of 1210
Software
Standby Mode
On/off
Off
REJ09B0245-0400
In Other
Operations
On/off
Off