DF2339VFC25V Renesas Electronics America, DF2339VFC25V Datasheet - Page 263

• Manufacturer Part Number: DF2339VFC25V
• Description: IC H8S/2300 MCU FLASH 144QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2339VFC25V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 106
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 4x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-QFP
• For Use With: EDK2329 - DEV EVALUATION KIT H8S/2329
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Bit 5—Data Transfer Master Enable 0 (DTME0): Enables or disables data transfer on channel
0.
Bit 5
DTME0
0
1
Bits 6 and 4—Data Transfer Enable (DTE): When DTE = 0, data transfer is disabled and the
activation source selected by the data transfer factor setting is ignored. If the activation source is
an internal interrupt, an interrupt request is issued to the CPU or DTC. If the DTIE bit is set to 1
when DTE = 0, the DMAC regards this as indicating the end of a transfer, and issues a transfer
end interrupt request to the CPU.
The conditions for the DTE bit being cleared to 0 are as follows:
• When initialization is performed
• When the specified number of transfers have been completed
• When 0 is written to the DTE bit to forcibly abort the transfer, or for a similar reason
When DTE = 1 and DTME = 1, data transfer is enabled and the DMAC waits for a request by the
activation source selected by the data transfer factor setting. When a request is issued by the
activation source, DMA transfer is executed.
The condition for the DTE bit being set to 1 is as follows:
• When 1 is written to the DTE bit after the DTE bit is read as 0
Bit 6—Data Transfer Enable 1 (DTE1): Enables or disables data transfer on channel 1.
Bit 6
DTE1
0
1
Description
Description
Data transfer disabled. In normal mode, cleared to 0 by an NMI interrupt (Initial value)
Data transfer enabled
Data transfer disabled
Data transfer enabled
Rev.4.00 Sep. 07, 2007 Page 231 of 1210
REJ09B0245-0400
(Initial value)