HD6432160 RENESAS [Renesas Technology Corp], HD6432160 Datasheet - Page 511

• Manufacturer Part Number: HD6432160
• Description: Hitachi 16-Bit Single-Chip Microcomputer
• Manufacturer: RENESAS [Renesas Technology Corp]

17.4
17.4.1
In a receive operation, both KCLK (clock) and KD (data) are outputs on the keyboard side and
inputs on this LSI chip (system) side. KD receives a start bit, 8 data bits (LSB-first), an odd parity
bit, and a stop bit, in that order. The KD value is valid when KCLK is low. A sample receive
processing flowchart is shown in figure 17.3, and the receive timing in figure 17.4.
Operation
Receive Operation
Receive data processing
(receive enabled state)
Receive enabled state
and KDI bits both
Clear KBF flag
Set KBIOE bit
Read KBCRH
Read KBBR
Set KBE bit
KBF = 1?
PER = 0?
KBS = 1?
KCLKI
Start
1?
Figure 17.3 Sample Receive Processing Flowchart
Yes
Yes
Yes
Yes
[1]
[2]
No
[3]
No
No
No
[6]
Keyboard side in data
Execute receive abort
Error handling
transmission state.
[4]
processing.
[5]
[1] Set the KBIOE bit to 1 in
[2] Read KBCRH, and if the
[3] Detect the start bit output
[4] When a stop bit is received,
[5] Perform receive data
[6] Clear the KBF flag to 0 in
The receive operation can be
continued by repeating steps
[3] to [6].
Rev. 2.0, 08/02, page 471 of 788
KBCRL.
KCLKI and KDI bits are
both 1, set the KBE bit
(receive enabled state).
on the keyboard side and
receive data in
synchronization with the fall
of KCLK.
the keyboard buffer
controller drives KCLK low
to disable keyboard
transmission (automatic I/O
inhibit).
If the KBIE bit is set to 1 in
KBCRH, an interrupt
request is sent to the CPU
at the same time.
processing.
KBCRL. At the same time,
the system automatically
drives KCLK high, setting
the receive enabled state.