HD6432160 RENESAS [Renesas Technology Corp], HD6432160 Datasheet - Page 147

• Manufacturer Part Number: HD6432160
• Description: Hitachi 16-Bit Single-Chip Microcomputer
• Manufacturer: RENESAS [Renesas Technology Corp]

Operation Order: If the same interrupt is selected as a DTC activation source and a CPU
interrupt source, the DTC data transfer is performed first, followed by CPU interrupt exception
handling.
Table 5.7 shows the interrupt factor clear control and selection of interrupt factors by specification
of the DTCE bit of DTC's DTCERA to DTCERH, and the DISEL bit of DTC's MRB.
Table 5.7
DTCE
0
1
Legend
O :
o :
*:
Note: The SCI, IIC, LPC, or A/D converter interrupt source is cleared when the DTC reads or
5.7
5.7.1
This LSI can determine the specific address prefetch by the CPU to generate an address break
interrupt by setting ABRKCR and BAR. If an address break interrupt is generated, the address
break interrupt exception handling is performed.
With this function, the execution start point of a program containing a bug is detected and
execution is branched to the correcting program.
:
writes to the prescribed register, and is not dependent upon the DISEL bit.
Address Break
Features
The relevant interrupt is used. Interrupt source clearing is performed.
(The CPU should clear the source flag in the interrupt handling routine.)
The relevant interrupt is used. The interrupt source is not cleared.
The relevant interrupt cannot be used.
Don’t care
Interrupt Source Selection and Clearing Control
Settings
DTC
DISEL
*
0
1
Interrupt Sources Selection/Clearing Control
DTC
O
o
Rev. 2.0, 08/02, page 107 of 788
CPU
O
O