AT91RM9200-CI-002 Atmel, AT91RM9200-CI-002 Datasheet - Page 583

• Manufacturer Part Number: AT91RM9200-CI-002
• Description: IC ARM9 MCU 256 BGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91RM9200-CI-002

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 180MHz
• Connectivity: EBI/EMI, Ethernet, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: POR
• Number Of I /o: 122
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: ROM
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-BGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Data Converters: -

• EP2INT: Endpoint 2 Interrupt Status
0 = No Endpoint2 Interrupt pending.
1 = Endpoint2 Interrupt has been raised.
Several signals can generate this interrupt. The reason can be found by reading UDP_CSR2:
EP2INT is a sticky bit. Interrupt remains valid until EP2INT is cleared by writing in the corresponding UDP_CSR2 bit.
• EP3INT: Endpoint 3 Interrupt Status
0 = No Endpoint3 Interrupt pending.
1 = Endpoint3 Interrupt has been raised.
Several signals can generate this interrupt. The reason can be found by reading UDP_CSR3:
EP3INT is a sticky bit. Interrupt remains valid until EP3INT is cleared by writing in the corresponding UDP_CSR3 bit.
• EP4INT: Endpoint 4 Interrupt Status
0 = No Endpoint4 Interrupt pending.
1 = Endpoint4 Interrupt has been raised.
Several signals can generate this interrupt. The reason can be found by reading UDP_CSR4:
EP4INT is a sticky bit. Interrupt remains valid until EP4INT is cleared by writing in the corresponding UDP_CSR4 bit.
• EP5INT: Endpoint 5 Interrupt Status
0 = No Endpoint5 Interrupt pending.
1 = Endpoint5 Interrupt has been raised.
1768I–ATARM–09-Jul-09
RXSETUP set to 1
RX_DATA_BK0 set to 1
RX_DATA_BK1 set to 1
TXCOMP set to 1
STALLSENT set to 1
RXSETUP set to 1
RX_DATA_BK0 set to 1
RX_DATA_BK1 set to 1
TXCOMP set to 1
STALLSENT set to 1
RXSETUP set to 1
RX_DATA_BK0 set to 1
RX_DATA_BK1 set to 1
TXCOMP set to 1
STALLSENT set to 1
AT91RM9200
583