DF70845AD80FPV Renesas Electronics America, DF70845AD80FPV Datasheet - Page 854

• Manufacturer Part Number: DF70845AD80FPV
• Description: IC SUPERH MCU FLASH 112LQFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7080r

Specifications of DF70845AD80FPV

• Core Size: 32-Bit
• Program Memory Size: 512KB (512K x 8)
• Core Processor: SH-2
• Speed: 80MHz
• Connectivity: EBI/EMI, FIFO, I²C, SCI, SSU
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 76
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• No. Of I/o's: 76
• Ram Memory Size: 32KB
• Cpu Speed: 80MHz
• Digital Ic Case Style: LQFP
• Supply Voltage Range: 3V To 3.6V, 4.5V To 5.5V
• Embedded Interface Type: I2C, SCI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: R0K570865S001BE - KIT STARTER FOR SH7086R0K570865S000BE - KIT STARTER FOR SH7086HS0005KCU11H - EMULATOR E10A-USB H8S(X),SH2(A)
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Section 16 Serial Communication Interface with FIFO (SCIF)
Rev. 3.00 May 17, 2007 Page 796 of 1582
REJ09B0181-0300
Bit
4
3
Bit Name
O/E
STOP
Initial
value
0
0
R/W
R/W
R/W
Stop Bit Length
Description
Parity mode
Selects even or odd parity when parity bits are added
and checked. The O/E setting is used only in
asynchronous mode and only when the parity enable bit
(PE) is set to 1 to enable parity addition and checking.
The O/E setting is ignored in clock synchronous mode,
or in asynchronous mode when parity addition and
checking is disabled.
0: Even parity*
1: Odd parity*
Note: 1. If even parity is selected, the parity bit is
Selects one or two bits as the stop bit length in
asynchronous mode. This setting is used only in
asynchronous mode. It is ignored in clock synchronous
mode because no stop bits are added.
When receiving, only the first stop bit is checked,
regardless of the STOP bit setting. If the second stop
bit is 1, it is treated as a stop bit, but if the second stop
bit is 0, it is treated as the start bit of the next incoming
character.
0: One stop bit
1: Two stop bits
When transmitting, a single 1-bit is added at the end
of each transmitted character.
When transmitting, two 1 bits are added at the end of
each transmitted character.
2. If odd parity is selected, the parity bit is
added to transmit data to make an even
number of 1s in the transmitted character and
parity bit combined. Receive data is checked
to see if it has an even number of 1s in the
received character and parity bit combined.
added to transmit data to make an odd
number of 1s in the transmitted character and
parity bit combined. Receive data is checked
to see if it has an odd number of 1s in the
received character and parity bit combined.
2
1