DF70845AD80FPV Renesas Electronics America, DF70845AD80FPV Datasheet - Page 648

• Manufacturer Part Number: DF70845AD80FPV
• Description: IC SUPERH MCU FLASH 112LQFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7080r

Specifications of DF70845AD80FPV

• Core Size: 32-Bit
• Program Memory Size: 512KB (512K x 8)
• Core Processor: SH-2
• Speed: 80MHz
• Connectivity: EBI/EMI, FIFO, I²C, SCI, SSU
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 76
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• No. Of I/o's: 76
• Ram Memory Size: 32KB
• Cpu Speed: 80MHz
• Digital Ic Case Style: LQFP
• Supply Voltage Range: 3V To 3.6V, 4.5V To 5.5V
• Embedded Interface Type: I2C, SCI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: R0K570865S001BE - KIT STARTER FOR SH7086R0K570865S000BE - KIT STARTER FOR SH7086HS0005KCU11H - EMULATOR E10A-USB H8S(X),SH2(A)
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Section 11 Multi-Function Timer Pulse Unit 2 (MTU2)
Complementary PWM Mode Output Protection Function:
Complementary PWM mode output has the following protection functions.
1. Register and counter miswrite prevention function
2. Halting of PWM output by external signal
3. Halting of PWM output when oscillator is stopped
Rev. 3.00 May 17, 2007 Page 590 of 1582
REJ09B0181-0300
With the exception of the buffer registers, which can be rewritten at any time, access by the
CPU can be enabled or disabled for the mode registers, control registers, compare registers,
and counters used in complementary PWM mode by means of the RWE bit in the timer
read/write enable register (TRWER). The applicable registers are some (21 in total) of the
registers in channels 3 and 4 shown in the following:
 TCR_3 and TCR_4, TMDR_3 and TMDR_4, TIORH_3 and TIORH_4, TIORL_3 and
This function enables miswriting due to CPU runaway to be prevented by disabling CPU
access to the mode registers, control registers, and counters. When the applicable registers are
read in the access-disabled state, undefined values are returned. Writing to these registers is
ignored.
The 6-phase PWM output pins can be set automatically to the high-impedance state by
inputting specified external signals. There are four external signal input pins.
See section 13, Port Output Enable (POE), for details.
If it is detected that the clock input to this LSI has stopped, the 6-phase PWM output pins
automatically go to the high-impedance state. The pin states are not guaranteed when the clock
is restarted.
See section 4.7, Function for Detecting Oscillator Stop.
TIORL_4, TIER_3 and TIER_4, TCNT_3 and TCNT_4, TGRA_3 and TGRA_4, TGRB_3
and TGRB_4, TOER, TOCR, TGCR, TCDR, and TDDR.