PEB20571FV31XP Infineon Technologies, PEB20571FV31XP Datasheet - Page 100

no-image

PEB20571FV31XP

Manufacturer Part Number
PEB20571FV31XP
Description
Manufacturer
Infineon Technologies
Datasheet

Specifications of PEB20571FV31XP

Lead Free Status / Rohs Status
Compliant
4.2.9
The S/T interface establishes a direct link between the VIP and connected subscriber
terminals or to the Central Office. It consists of two pairs of copper wires: one for the
transmit and one for the receive direction.
Direct access to the VIP’s S/T interface by the DELIC is not possible. 2B+D user data as
well as S/Q channel information can be inserted and extracted via the IOM-2000
interface.
Framing bits are generated and transmitted to the VIP by the DELIC.
Transmission over the S/T interface is performed at a rate of 192 kbit/s. Pseudo-ternary
coding with 100 % pulse width is used. 144 kbit/s are used for user data (36 bits of
B1+B2+D) and 48 kbit/s (12 bits) are used for framing, S/Q and maintenance
information. For each S/T channel, the VIP uses two symmetrical, differential outputs
(SX1, SX2) and two symmetrical, differential inputs (SR1, SR2). These signals are
coupled via external circuitry and two transformers onto the 4 wire S/T interface. The
nominal pulse amplitude on the S/T interface is 750 mV (zero-peak).
S/T Coding
The following figure illustrates the code used. A binary ONE is represented by no line
signal (0 V). Binary ZEROs are coded with alternating positive and negative pulses with
two exceptions: the first binary ZERO following the framing balance bit is of the same
polarity as the framing-balancing bit, and the F-bit is always at positive level (required
code violations).
Figure 25
A standard S/T frame consists of 48 bits. In the direction TE
transmitted with a 2-bit offset. For details on the framing rules please refer to ITU I.430.
The following figure illustrates the standard frame structure for both directions (NT
and TE
Data Sheet
NT) with all framing and maintenance bits.
S/T Interface Frame Structure
S/T Interface Line Code (without code violation)
83
Functional Description
NT the frame is
PEB 20570
PEB 20571
2003-07-31
TE

Related parts for PEB20571FV31XP