R88A-CNG02R Omron, R88A-CNG02R Datasheet - Page 133

• Manufacturer Part Number: R88A-CNG02R
• Description: Encoder Connector INC Motor
• Manufacturer: Omron

Specifications of R88A-CNG02R

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

3-2 Servomotor Specifications
General Specifications
*1. The amplitude may be amplified by mechanical resonance. Do not exceed 80% of the specified value for extended periods of time.
*2. UL application pending for Servomotor sizes from 6 to 7.5 kW.
Note 1. Do not use the cable when it is laying in oil or water.
Note 2. Do not expose the cable outlet or connections to stress due to bending or the weight of the cable itself.
Ambient operating
temperature and humidity
Ambient storage
temperature and humidity
Storage and operating
atmosphere
Vibration resistance
Impact resistance
Insulation resistance
Dielectric strength
Operating position
Insulation grade
Structure
Protective structure
Vibration grade
Mounting method
EC
Direc-
tives
UL standards
CSA standards
Item
The following OMNUC G-Series AC Servomotors are available.
There are various options available on the Servomotors, such as models with brakes or different
shaft types. Select a Servomotor based on the mechanical system’s load conditions and the
installation environment.
EMC
Directive
Low-voltage
Directive
• 3,000-r/min Servomotors
• 3,000-r/min Flat Servomotors
• 2,000-r/min Servomotors
• 1,000-r/min Servomotors
*1
0 to 40°C, 85% RH max. (with no condensation)
−20 to 65°C, 85% RH
max. (with no con-
densation)
No corrosive gases
10 to 2,500 Hz and
acceleration of
49 m/s
X, Y, and Z directions
Acceleration of
98 m/s
each in the X, Y, and
Z directions
20 MΩ min. at 500 VDC between the power terminals and FG terminal
1,500 VAC (50 or 60 Hz) for 1 minute between the power terminals and FG terminal
All directions
Type B
Totally enclosed, self-cooling
IP65 (excluding the output shaft rotating section and lead wire ends)
V-15
Flange-mounting
EN 55011 Class A Group 1
EN 61000-6-2, IEC 61000-4-2/-3/-4/-5/-6/-11
IEC 60034-1/-5
UL 1004
CSA 22.2 No.100
50 to 750 W
2
2
max. 3 times
max. in the
3,000-r/min Servomotors
−20 to 80°C, 85% RH max. (with no condensation)
10 to 2,500 Hz and
acceleration of
24.5 m/s
X, Y, and Z directions
Acceleration of
98 m/s
each in the X, Y, and
Z directions
Type F
1 to 5 kW
2
max. 3 times
2
max. in the
Type B
10 to 2,500 Hz and
acceleration of
49 m/s
X, Y, and Z direc-
tions
Acceleration of
98 m/s
each in the X, Y, and
Z directions
3,000-r/min Flat
100 to 400 W
Servomotors
3-2 Servomotor Specifications
2
2
max. 3 times
max. in the
10 to 2,500 Hz and accelera-
tion of 24.5 m/s
Y, and Z directions
Acceleration of 98 m/s
2 times vertically
Type F
900 W to 5 kW
1,000-r/min Servomotors
2,000-r/min Servomotors
2
max. in the X,
UL:
pending
6 to 7.5 kW
2
max.
3-32
*2
3