AT32AP7002-CTUT Atmel, AT32AP7002-CTUT Datasheet - Page 856

• Manufacturer Part Number: AT32AP7002-CTUT
• Description: IC MCU 32BIT AVR32 196-CBGA
• Manufacturer: Atmel
• Series: AVR®32 AP7r

Specifications of AT32AP7002-CTUT

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 150MHz
• Connectivity: EBI/EMI, I²C, MMC, PS2, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, DMA, I²C, LCD, POR, PWM, WDT
• Number Of I /o: 85
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: D/A 2x16b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 196-CBGA
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: I2C, JTAG, PS2, SPI, SSC, UART, USART, USB
• Maximum Clock Frequency: 150 MHz
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Dac: 16 bit, 2 Channel
• Package: 196CTBGA
• Device Core: AVR32
• Family Name: AT32
• Maximum Speed: 150 MHz
• Operating Supply Voltage: 1.8|3.3 V
• For Use With: ATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMRATNGW100 - KIT AVR32 NETWORK GATEWAYATSTK1000 - KIT STARTER FOR AVR32AP7000
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Details

37.8
37.8.1
37.8.1.1
37.8.2
32054F–AVR32–09/09
JTAG Data Registers
Device Identification Register
Reset register
Device specific ID codes
The following device specific registers can be selected as JTAG scan chain depending on the
instruction loaded in the JTAG Instruction Register. Additional registers exist, but are implicitly
described in the functional description of the relevant instructions.
The Device Identification Register contains a unique identifier for each product. The register is
selected by the IDCODE instruction, which is the default instruction after a JTAG reset.
The different device configurations have different JTAG ID codes, as shown in
Table 37-11. Device and JTAG ID
The reset register is selected by the AVR_RESET instruction and contains one bit for each reset
domain in the device. Setting each bit to one will keep that domain reset until the bit is cleared.
Bit
Device ID
Bit
Device ID
Revision
Part Number
Manufacturer ID
Device name
AT32AP7000
AT32AP7002
CPU
ICACHE
31
MS
Revision
B
4 bits
OCD
This is a 4 bit number identifying the revision of the component.
Rev A = 0x0, B = 0x1, etc.
The part number is a 16 bit code identifying the component.
The Manufacturer ID is a 11 bit code identifying the manufacturer.
The JTAG manufacturer ID for ATMEL is 0x01F.
CPU
Instruction cache
4
28
27
JTAG ID code (r is the revision number)
0xr1E8203F
0xr1E8203F
Part Number
16 bits
APP
3
12
DCACHE
11
2
Manufacturer ID
11 bits
ICACHE
1
AT32AP7002
Table
1
37-11.
CPU
LSB
0
LSB
1 bit
1
0
856
.