AT32AP7002-CTUT Atmel, AT32AP7002-CTUT Datasheet - Page 491

• Manufacturer Part Number: AT32AP7002-CTUT
• Description: IC MCU 32BIT AVR32 196-CBGA
• Manufacturer: Atmel
• Series: AVR®32 AP7r

Specifications of AT32AP7002-CTUT

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 150MHz
• Connectivity: EBI/EMI, I²C, MMC, PS2, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, DMA, I²C, LCD, POR, PWM, WDT
• Number Of I /o: 85
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: D/A 2x16b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 196-CBGA
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: I2C, JTAG, PS2, SPI, SSC, UART, USART, USB
• Maximum Clock Frequency: 150 MHz
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Dac: 16 bit, 2 Channel
• Package: 196CTBGA
• Device Core: AVR32
• Family Name: AT32
• Maximum Speed: 150 MHz
• Operating Supply Voltage: 1.8|3.3 V
• For Use With: ATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMRATNGW100 - KIT AVR32 NETWORK GATEWAYATSTK1000 - KIT STARTER FOR AVR32AP7000
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Details

27.6.4
27.6.4.1
32054F–AVR32–09/09
Standard Read and Write Protocols
Read waveforms
•NRD waveform
In the following sections, the byte access type is not considered. Byte select lines (NBS0 to
NBS3) always have the same timing as the address bus (A). NWE represents either the NWE
signal in byte select access type or one of the byte write lines (NWR0 to NWR3) in byte write
access type. NWR0 to NWR3 have the same timings and protocol as NWE. In the same way,
NCS represents one of the NCS[0..5] chip select lines.
The read cycle is shown on
The read cycle starts with the address setting on the memory address bus, i.e.:
Figure 27-9. Standard Read Cycle
The NRD signal is characterized by a setup timing, a pulse width, and a hold timing.
1. NRDSETUP: the NRD setup time is defined as the setup of address before the NRD fall-
2. NRDPULSE: the NRD pulse length is the time between NRD falling edge and NRD rising
NBS0, NBS1,
ing edge.
edge.
A0, A1
{A[25:2], A1, A0} for 8-bit devices
{A[25:2], A1} for 16-bit devices
A[25:2] for 32-bit devices.
A[25:2]
D[15:0]
CLK_SMC
NRD
NCS
NCSRDSETUP
NRDSETUP
Figure 27-9 on page
NCSRDPULSE
NRDPULSE
NRDCYCLE
491.
NRDHOLD
AT32AP7002
NCSRDHOLD
491