AT32AP7002-CTUT Atmel, AT32AP7002-CTUT Datasheet - Page 493

• Manufacturer Part Number: AT32AP7002-CTUT
• Description: IC MCU 32BIT AVR32 196-CBGA
• Manufacturer: Atmel
• Series: AVR®32 AP7r

Specifications of AT32AP7002-CTUT

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 150MHz
• Connectivity: EBI/EMI, I²C, MMC, PS2, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, DMA, I²C, LCD, POR, PWM, WDT
• Number Of I /o: 85
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: D/A 2x16b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 196-CBGA
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: I2C, JTAG, PS2, SPI, SSC, UART, USART, USB
• Maximum Clock Frequency: 150 MHz
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Dac: 16 bit, 2 Channel
• Package: 196CTBGA
• Device Core: AVR32
• Family Name: AT32
• Maximum Speed: 150 MHz
• Operating Supply Voltage: 1.8|3.3 V
• For Use With: ATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMRATNGW100 - KIT AVR32 NETWORK GATEWAYATSTK1000 - KIT STARTER FOR AVR32AP7000
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Details

27.6.4.2
32054F–AVR32–09/09
Read mode
•Null Pulse
•Read is controlled by NRD (MODE.READMODE = 1)
Figure 27-10. No Setup, No Hold on NRD, and NCS Read Signals
Programming null pulse is not permitted. Pulse must be at least written to one. A null value leads
to unpredictable behavior.
As NCS and NRD waveforms are defined independently of one other, the SMC needs to know
when the read data is available on the data bus. The SMC does not compare NCS and NRD tim-
i n g s t o k n o w w h i c h s ig n a l r i s e s f i r s t . T h e R e a d M o d e b it i n t h e M O D E r e g i s t e r
(MODE.READMODE) of the corresponding chip select indicates which signal of NRD and NCS
controls the read operation.
Figure 27-11 on page 494
RAM. The read data is available t
ing edge of NRD. In this case, the MODE.READMODE bit must be written to one (read is
controlled by NRD), to indicate that data is available with the rising edge of NRD. The SMC sam-
ples the read data internally on the rising edge of CLK_SMC that generates the rising edge of
NRD, whatever the programmed waveform of NCS may be.
NBS0, NBS1,
A0, A1
CLK_SMC
A[25:2]
D[15:0]
NRD
NCS
NRDSETUP
NCSRDPULSE
NRDCYCLE
shows the waveforms of a read operation of a typical asynchronous
PACC
after the falling edge of NRD, and turns to ‘Z’ after the ris-
NRDPULSE
NCSRDPULSE
NRDCYCLE
NRDCYCLE
NRDPULSE
NCSRDPULSE
AT32AP7002
493