AT32AP7002-CTUT Atmel, AT32AP7002-CTUT Datasheet - Page 735

• Manufacturer Part Number: AT32AP7002-CTUT
• Description: IC MCU 32BIT AVR32 196-CBGA
• Manufacturer: Atmel
• Series: AVR®32 AP7r

Specifications of AT32AP7002-CTUT

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 150MHz
• Connectivity: EBI/EMI, I²C, MMC, PS2, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, DMA, I²C, LCD, POR, PWM, WDT
• Number Of I /o: 85
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: D/A 2x16b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 196-CBGA
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: I2C, JTAG, PS2, SPI, SSC, UART, USART, USB
• Maximum Clock Frequency: 150 MHz
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Dac: 16 bit, 2 Channel
• Package: 196CTBGA
• Device Core: AVR32
• Family Name: AT32
• Maximum Speed: 150 MHz
• Operating Supply Voltage: 1.8|3.3 V
• For Use With: ATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMRATNGW100 - KIT AVR32 NETWORK GATEWAYATSTK1000 - KIT STARTER FOR AVR32AP7000
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Details

34. LCD Controller (LCDC)
34.1
34.2
32054F–AVR32–09/09
Features
Description
Rev: 1.7.0.3
•
•
•
The LCD Controller consists of logic for transferring LCD image data from an external display
buffer to an LCD module with integrated common and segment drivers.
The LCD Controller supports single and double scan monochrome and color passive STN LCD
modules and single scan active TFT LCD modules. On monochrome STN displays, up to 16
gray shades are supported using a time-based dithering algorithm and Frame Rate Control
(FRC) method. This method is also used in color STN displays to generate up to 4096 colors.
The LCD Controller has a display input buffer (FIFO) to allow a flexible connection of the exter-
nal high speed bus master interface, and a lookup table to allow palletized display
configurations.
The LCD Controller is programmable in order to support many different requirements such as
resolutions up to 2048 x 2048; pixel depth (1, 2, 4, 8, 16, 24 bits per pixel); data line width (4, 8,
16 or 24 bits) and interface timing.
The LCD Controller is connected to the High Speed Bus (HSB) as a master for reading pixel
data. However, the LCD Controller interfaces with the HSB as a slave in order to configure its
registers.
STN Panel Features
TFT Panel Features
Common Features
– Single and Dual Scan Color and Monochrome LCD Panels
– 4-bit Single Scan, 8-bit Single or Dual Scan, 16-bit Dual Scan Interfaces
– Up to 16 Gray Levels for Monochrome and Up to 4096 Colors for Color Panel
– 1 or 2 Bits per Pixel (Palletized), 4 Bits per Pixel (Non-palletized) for Monochrome
– 1, 2, 4 or 8 bits per Pixel (Palletized), 16 Bits per Pixel (Non-palletized) for Color STN Display
– Single Scan Active TFT LCD Panel
– Up to 24-bit Single Scan Interfaces
– 1, 2, 4 or 8 Bits per Pixel (Palletized), 16 or 24 Bits per Pixel (Non-palletized)
– Configurable Screen Size Up to 2048 x 2048
– DMA Controller for Reading the Display Data from an External Memory
– 2K bytes Input FIFO
– 2D Frame Buffer Addressing Allowing Movement in an Image Larger Than the Screen Size
AT32AP7002
735