EFM32TG210F32 Energy Micro, EFM32TG210F32 Datasheet - Page 3

• Manufacturer Part Number: EFM32TG210F32
• Description: MCU 32BIT 32KB FLASH 32-QFN
• Manufacturer: Energy Micro
• Series: Tiny Geckor

Specifications of EFM32TG210F32

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 32MHz
• Connectivity: EBI/EMI, I²C, IrDA, SmartCard, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 24
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.8 V
• Data Converters: A/D 4x12b, D/A 1x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-VQFN Exposed Pad
• Processor Series: EFM32
• Core: ARM Cortex-M3
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: UART, I2C, SPI
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 17
• Number Of Timers: 1
• Operating Supply Voltage: 1.8 V to 3.8 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Processor To Be Evaluated: EFM32TG210
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

2 About This Document
2.1 Conventions
2010-12-21 - d0034_Rev0.90
This document contains reference material for the EFM32TG Tiny Gecko series of Microcontrollers.
All modules and peripherals in the Tiny Gecko series devices are described in general terms. Not all
modules are present in all devices and the feature set for each device might vary. Such differences,
including pinout, are covered in the device-specific datasheets.
Register Names
Register names are given with a module name prefix followed by the short register name:
TIMERn_CTRL - Control Register
The "n" denotes the module number for modules which can exist in more than one instance.
Some registers are grouped which leads to a group name following the module prefix:
GPIO_Px_DOUT - Port Data Out Register
The "x" denotes the port instance (A,B,...)
Bit Fields
Registers contain one or more bit fields which can be 1 to 32 bits wide. Bit fields wider than 1 bit are
given with start and stop bit (x:y).
Address
The address for each register can be found by adding the modules base address (found in Memory
Map), with the offset address for the register (found in module Register Map).
Access Type
The register access types used in the register descriptions are explained in Table 2.1 (p. 3) .
Table 2.1. Register Access Types
Number format
0x prefix is used for hexadecimal numbers
0b prefix is used for binary numbers
Numbers without prefix are in decimal representation.
Reserved
Access Type
R
RW
RW1
W1
W
RWH
...the world's most energy friendly microcontrollers
3
Description
Read only. Writes are ignored
Readable and writable
Readable and writable. Only writes to 1 have effect
Read value undefined. Only writes to 1 have effect
Write only. Read value undefined.
Readable, writable and updated by hardware
www.energymicro.com