HD64F2676VFC33 Renesas Electronics America, HD64F2676VFC33 Datasheet - Page 330

• Manufacturer Part Number: HD64F2676VFC33
• Description: IC H8S MCU FLASH 256K 144-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2600r

Specifications of HD64F2676VFC33

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: IrDA, SCI
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 103
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 4x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 7 DMA Controller (DMAC)
Bit
7
Rev. 3.00 Mar 17, 2006 page 278 of 926
REJ09B0283-0300
DMABCRL
Bit Name
DTME1
Initial Value
0
R/W
R/W
Description
Data Transfer Master Enable 1
Together with the DTE1 bit, this bit controls
enabling or disabling of data transfer on
channel 1. When both the DTME1 bit and DTE1
bit are set to 1, transfer is enabled for channel
1.
If channel 1 is in the middle of a burst mode
transfer when an NMI interrupt is generated, the
DTME1 bit is cleared, the transfer is interrupted,
and bus mastership passes to the CPU. When
the DTME1 bit is subsequently set to 1 again,
the interrupted transfer is resumed. In block
transfer mode, however, the DTME1 bit is not
cleared by an NMI interrupt, and transfer is not
interrupted.
[Clearing conditions]
[Setting condition]
When 1 is written to DTME1 after reading
DTME1 = 0
When initialization is performed
When NMI is input in burst mode
When 0 is written to the DTME1 bit