HD64F2676VFC33 Renesas Electronics America, HD64F2676VFC33 Datasheet - Page 154

• Manufacturer Part Number: HD64F2676VFC33
• Description: IC H8S MCU FLASH 256K 144-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2600r

Specifications of HD64F2676VFC33

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: IrDA, SCI
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 103
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 4x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 5 Interrupt Controller
5.4.2
The sources for internal interrupts from on-chip peripheral modules have the following features:
5.5
Table 5.2 shows interrupt exception handling sources, vector addresses, and interrupt priorities.
For default priorities, the lower the vector number, the higher the priority. When interrupt control
mode 2 is set, priorities among modules can be set by means of the IPR. Modules set at the same
priority will conform to their default priorities. Priorities within a module are fixed.
Rev. 3.00 Mar 17, 2006 page 102 of 926
REJ09B0283-0300
IRQn
input
For each on-chip peripheral module there are flags that indicate the interrupt request status,
and enable bits that select enabling or disabling of these interrupts. They can be controlled
independently. When the enable bit is set to 1, an interrupt request is issued to the interrupt
controller.
The interrupt priority level can be set by means of IPR.
The DMAC and DTC can be activated by a TPU, SCI, or other interrupt request.
When the DMAC or DTC is activated by an interrupt request, it is not affected by the interrupt
control mode or CPU interrupt mask bit.
Note: n = 15 to 0
Internal Interrupts
Interrupt Exception Handling Vector Table
Figure 5.2 Block Diagram of Interrupts IRQ15 to IRQ0
IRQnSCA, IRQnSCB
level detection
Edge/
circuit
Clear signal
S
R
IRQnF
Q
IRQnE
IRQn interrupt
request