DF2148ATE20 Renesas Electronics America, DF2148ATE20 Datasheet - Page 283

• Manufacturer Part Number: DF2148ATE20
• Description: IC H8S MCU FLASH 128K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2148ATE20

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: Host Interface, I²C, IrDA, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2148ATE20; HD64F2148ATE20

8.4.4
Port 3 has a built-in MOS input pull-up function that can be controlled by software. This MOS
input pull-up function can be used in modes 2 and 3 (when EXPE = 0), and can be specified as on
or off on a bit-by-bit basis.
When a P3DDR bit is cleared to 0 in mode 2 or 3 (when EXPE = 0), setting the corresponding
P3PCR bit to 1 turns on the MOS input pull-up for that pin.
The MOS input pull-up function is in the off state after a reset and in hardware standby mode. The
prior state is retained in software standby mode.
Table 8.9 summarizes the MOS input pull-up states.
Table 8.9
Legend:
Off:
On/Off: On when P3DDR = 0 and P3PCR = 1; otherwise off.
Mode
1, 2, 3 (EXPE = 1) Off
2, 3 (EXPE = 0)
MOS input pull-up is always off.
MOS Input Pull-Up Function
MOS Input Pull-Up States (Port 3)
Figure 8.11 Port 3 Pin Functions (Modes 2 and 3 (EXPE = 0))
Reset
Off
Port 3
Hardware
Standby Mode
Off
Off
P37 (I/O)/HDB7 (I/O)
P36 (I/O)/HDB6 (I/O)
P35 (I/O)/HDB5 (I/O)
P34 (I/O)/HDB4 (I/O)
P33 (I/O)/HDB3 (I/O)
P32 (I/O)/HDB2 (I/O)
P31 (I/O)/HDB1 (I/O)
P30 (I/O)/HDB0 (I/O)
Rev. 4.00 Sep 27, 2006 page 237 of 1130
Software
Standby Mode
Off
On/Off
Section 8 I/O Ports
In Other
Operations
Off
On/Off
REJ09B0327-0400