PEF2256EV22NP Lantiq, PEF2256EV22NP Datasheet - Page 165

• Manufacturer Part Number: PEF2256EV22NP
• Manufacturer: Lantiq

Specifications of PEF2256EV22NP

• Number Of Transceivers: 1
• Screening Level: Industrial
• Mounting: Surface Mount
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Lead Free Status / RoHS Status: Supplier Unconfirmed

•
•
7.3.3
The FALC
record code violations, framing bit errors, CRC6 bit errors, errored blocks and the
number of received multiframes in asynchronous state or the Changes Of Frame
Alignment (COFA). Counting of the multiframes in asynchronous state and of the COFA
parameter is done in a 6/2-bit counter. Each of the error counters is buffered. Buffer
update is done in two modes:
•
•
In the one-second mode an internal/external one-second timer updates these buffers
and resets the counter to accumulate the error events in the next one-second period.
The error counter cannot overflow. Error events occurring during error counter reset are
not be lost.
7.3.4
The FALC
alarms or error events in the received data:
framing errors, CRC errors, code violations, loss of frame alignment, loss-of-signal,
alarm indication signal, receive and transmit slips.
With a programmable interrupt mask register ESM all these alarms or error events can
generate an Errored Second Interrupt (ISR3.ES) if enabled.
7.3.5
Additionally a one-second timer interrupt can be generated internally to indicate that the
enabled alarm status bits or the error counters have to be checked. The one-second
timer signal is output on port SEC/FSC (GPC1.CSFP1/0). Optionally synchronization to
an external second timer is possible which has to be provided on pin SEC/FSC.
Data Sheet
Automatic clock source switching
In slave mode (LIM0.MAS = 0) the DCO-R synchronizes on the recovered route
clock. In case of loss-of-signal (LOS) the DCO-R switches to master mode
automatically. If bit CMR1.DCS is set, automatic switching from RCLK to SYNC is
disabled.
Automatic freeze signaling:
Updating of the received signaling information is controlled by the freeze signaling
status. The freeze signaling status is activated automatically, if a loss-of-signal or a
loss of multiframe alignment or a receive slip occurs. The internal signaling buffer
RS(12:1) is frozen. Optionally automatic freeze signaling is disabled by setting bit
SIC3.DAF = 1.
One-second accumulation
On demand using handshake with writing to the DEC register.
®
®
Error Counters
Errored Second
One-Second Timer
56 offers six error counters where each of them has a length of 16 bit. They
56 supports the error performance monitoring by detecting the following
165
Functional Description T1/J1
Rev. 1.1, 2005-06-13
PEF 2256 H/E
FALC
®
56