SAM3U2C Atmel Corporation, SAM3U2C Datasheet - Page 405

• Manufacturer Part Number: SAM3U2C
• Manufacturer: Atmel Corporation

Specifications of SAM3U2C

• Flash (kbytes): 128 Kbytes
• Pin Count: 100
• Max. Operating Frequency: 96 MHz
• Cpu: Cortex-M3
• # Of Touch Channels: 28
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 57
• Ext Interrupts: 57
• Usb Transceiver: 1
• Quadrature Decoder Channels: 1
• Usb Speed: Hi-Speed
• Usb Interface: Device
• Spi: 4
• Twi (i2c): 1
• Uart: 4
• Ssc: 1
• Sd / Emmc: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 12
• Adc Speed (ksps): 384
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 36
• Self Program Memory: YES
• External Bus Interface: 1
• Dram Memory: No
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 1.62 to 3.6
• Fpu: No
• Mpu / Mmu: Yes / No
• Timers: 3
• Output Compare Channels: 3
• Input Capture Channels: 3
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

25.18.3
Name:
Address:
Access:
Reset:
• SMCSTS: NAND Flash Controller status (this field cannot be reset)
0: NAND Flash Controller is disabled.
1: NAND Flash Controller is enabled.
• RB_RISE: Selected Ready Busy Rising Edge Detected
When set to one, this flag indicates that a rising edge on Ready/Busy Line has been detected. This flag is reset after a sta-
tus read operation. The Ready/Busy line selected is the decoding of the set NFCCSID, RBNSEL fields.
• RB_FALL: Selected Ready Busy Falling Edge Detected
When set to one, this flag indicates that a falling edge on Ready/Busy Line has been detected. This flag is reset after a sta-
tus read operation. The Ready/Busy line is selected through the decoding of the set NFCSID, RBNSEL fields.
• NFCBUSY: NFC Busy (this field cannot be reset)
When set to one this flag indicates that the Controller is activated and accesses the memory device.
• NFCWR: NFC Write/Read Operation (this field cannot be reset)
When a command is issued, this field indicates the current Read or Write Operation. This field can be manually updated
with the use of the SMC_CTRL register.
• NFCSID: NFC Chip Select ID (this field cannot be reset)
When a command is issued, this field indicates the value of the targeted chip select. This field can be manually updated
with the use of the SMC_CTRL register.
• XFRDONE: NFC Data Transfer Terminated
When set to one, this flag indicates that the NFC has terminated the Data Transfer. This flag is reset after a status read
operation.
• CMDDONE: Command Done
When set to one, this flag indicates that the NFC has terminated the Command. This flag is reset after a status read
operation.
6430E–ATARM–29-Aug-11
6430E–ATARM–29-Aug-11
NFCASE
31
23
15
–
–
7
–
SMC NFC Status Register
0x400E0008
SMC_SR
Read-only
0x00000000
AWB
30
22
14
–
6
–
RB_FALL
NFCSID
UNDEF
29
21
13
–
5
RB_RISE
DTOE
28
20
12
–
4
NFCWR
27
19
11
–
–
3
–
26
18
10
–
–
–
2
–
CMDDONE
SAM3U Series
SAM3U Series
25
17
–
9
–
1
–
RB_EDGE0
XFRDONE
NFCBUSY
SMCSTS
24
16
8
0
405
405