SAM3U2C Atmel Corporation, SAM3U2C Datasheet - Page 287

• Manufacturer Part Number: SAM3U2C
• Manufacturer: Atmel Corporation

Specifications of SAM3U2C

• Flash (kbytes): 128 Kbytes
• Pin Count: 100
• Max. Operating Frequency: 96 MHz
• Cpu: Cortex-M3
• # Of Touch Channels: 28
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 57
• Ext Interrupts: 57
• Usb Transceiver: 1
• Quadrature Decoder Channels: 1
• Usb Speed: Hi-Speed
• Usb Interface: Device
• Spi: 4
• Twi (i2c): 1
• Uart: 4
• Ssc: 1
• Sd / Emmc: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 12
• Adc Speed (ksps): 384
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 36
• Self Program Memory: YES
• External Bus Interface: 1
• Dram Memory: No
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 1.62 to 3.6
• Fpu: No
• Mpu / Mmu: Yes / No
• Timers: 3
• Output Compare Channels: 3
• Input Capture Channels: 3
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

19.4.4
6430E–ATARM–29-Aug-11
6430E–ATARM–29-Aug-11
Using Backup Batteries/Backup Supply
The product can be used with or without backup batteries, or more generally a backup supply.
When a backup supply is used (See
mode and no other external supply is applied on the chip. In this case the user needs to clear
VDDIORDY bit in the Supply Controller Mode Register (SUPC_MR) at least two slow clock peri-
ods before VDDIO voltage is removed. When waking up from Backup mode, the programmer
needs to set VDDIORDY.
Figure 19-2. Separated Backup Supply Powering Scheme
Note:
When a separated backup supply for VDDBU is not used (See
voltage applied on VDDIO is kept, all of the I/O configurations (i.e. WKUP pin configuration) are
kept during backup mode. When not using backup batteries, VDDIORDY is set so the user does
not need to program it.
Restrictions: With Main Supply < 3V, some peripherals such as USB and ADC might not be oper-
ational. Refer to the DC Characteristics of the product for actual possible ranges for such
peripherals.
Main Supply (1.8V-3.6V)
Figure
Backup Batteries
19-2), only VDDBU voltage is present in Backup
VDDUTMI
VDDANA
VDDCORE
VDDBU
VDDIO
FWUP
VDDIN
VDDPLL
VDDOUT
SHDN
Figure
SAM3U Series
SAM3U Series
19-3), since the external
Regulator
Voltage
287
287