UPD78F0138HGK-9ET-A Renesas Electronics America, UPD78F0138HGK-9ET-A Datasheet - Page 454

• Manufacturer Part Number: UPD78F0138HGK-9ET-A
• Description: MCU 8BIT 60K FLASH 64TQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0/Kx1+r

Specifications of UPD78F0138HGK-9ET-A

• Core Processor: 78K/0
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: 3-Wire SIO, LIN, UART/USART
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 42
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

26.8.1 Registers used for self-programming function
(1) Flash programming mode control register (FLPMC)
452
The following three registers are used for the self-programming function.
Note Differs depending on the operation mode.
This register is used to enable or disable writing or erasing of the flash memory and to set the operation mode
during self-programming.
FLPMC can be written only in a specific sequence (see 26.8.1 (2) Flash protect command register (PFCMD))
so that the application system does not stop inadvertently due to malfunction caused by noise or program hang-
up.
FLPMC can be set by a 1-bit or 8-bit memory manipulation instruction.
RESET input sets this register to 0xH
Flash programming mode control register (FLPMC)
Flash protect command register (PFCMD)
Flash status register (PFS)
User mode:
On-board mode: 0CH
08H
Note
CHAPTER 26 FLASH MEMORY
.
User’s Manual U16899EJ3V0UD