UPD78F0138HGK-9ET-A Renesas Electronics America, UPD78F0138HGK-9ET-A Datasheet - Page 41

• Manufacturer Part Number: UPD78F0138HGK-9ET-A
• Description: MCU 8BIT 60K FLASH 64TQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0/Kx1+r

Specifications of UPD78F0138HGK-9ET-A

• Core Processor: 78K/0
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: 3-Wire SIO, LIN, UART/USART
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 42
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

2.2.3 P20 to P27 (port 2)
(1) Port mode
(2) Control mode
2.2.4 P30 to P33 (port 3)
timer I/O.
(1) Port mode
(2) Control mode
2.2.5 P40 to P43 (port 4)
register 4 (PM4). Use of an on-chip pull-up resistor can be specified by pull-up resistor option register 4 (PU4).
2.2.6 P50 to P53 (port 5)
register 5 (PM5). Use of an on-chip pull-up resistor can be specified by pull-up resistor option register 5 (PU5).
P20 to P27 function as an 8-bit input-only port. These pins also function as pins for A/D converter analog input.
The following operation modes can be specified in 1-bit units.
P30 to P33 function as a 4-bit I/O port. These pins also function as pins for external interrupt request input and
The following operation modes can be specified in 1-bit units.
P40 to P43 function as a 4-bit I/O port. P40 to P43 can be set to input or output in 1-bit units using port mode
P50 to P53 function as a 4-bit I/O port. P50 to P53 can be set to input or output in 1-bit units using port mode
P20 to P27 function as an 8-bit input-only port.
P20 to P27 function as A/D converter analog input pins (ANI0 to ANI7). When using these pins as analog input
pins, see (5) ANI0/P20 to ANI7/P27 in 12.6 Cautions for A/D Converter.
P30 to P33 function as a 4-bit I/O port. P30 to P33 can be set to input or output in 1-bit units using port mode
register 3 (PM3). Use of an on-chip pull-up resistor can be specified by pull-up resistor option register 3 (PU3).
P30 to P33 function as external interrupt request input pins and timer I/O pins.
(a) INTP1 to INTP4
(b) TI51
(c) TO51
Caution In the PD78F0138HD, be sure to pull the P31 pin down after reset to prevent malfunction.
Remark P31/INTP2 and P32/INTP3 of the PD78F0138HD can be used as on-chip debug mode setting pins
These are the external interrupt request input pins for which the valid edge (rising edge, falling edge, or both
rising and falling edges) can be specified.
This is an external count clock input pin to 8-bit timer/event counter 51.
This is a timer output pin.
when the on-chip debug function is used. For details, refer to CHAPTER 27 ON-CHIP DEBUG
FUNCTION ( PD78F0138HD ONLY).
CHAPTER 2 PIN FUNCTIONS
User’s Manual U16899EJ3V0UD
39