DF70844AD80FPV Renesas Electronics America, DF70844AD80FPV Datasheet - Page 898

• Manufacturer Part Number: DF70844AD80FPV
• Description: IC SUPERH MCU FLASH 112LQFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7080r

Specifications of DF70844AD80FPV

• Core Size: 32-Bit
• Program Memory Size: 256KB (256K x 8)
• Core Processor: SH-2
• Speed: 80MHz
• Connectivity: EBI/EMI, FIFO, I²C, SCI, SSU
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 76
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• No. Of I/o's: 76
• Ram Memory Size: 16KB
• Cpu Speed: 80MHz
• Digital Ic Case Style: LQFP
• Supply Voltage Range: 3V To 3.6V, 4.5V To 5.5V
• Embedded Interface Type: I2C, SCI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: R0K570865S001BE - KIT STARTER FOR SH7086R0K570865S000BE - KIT STARTER FOR SH7086HS0005KCU11H - EMULATOR E10A-USB H8S(X),SH2(A)
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Section 16 Serial Communication Interface with FIFO (SCIF)
In serial reception, the SCIF operates as described below.
1. The SCIF monitors the transmission line, and if a 0 start bit is detected, performs internal
2. The received data is stored in SCRSR in LSB-to-MSB order.
3. The parity bit and stop bit are received.
4. If the RIE bit in SCSCR is set to 1 when the RDF or DR flag changes to 1, a receive-FIFO-
Rev. 3.00 May 17, 2007 Page 840 of 1582
REJ09B0181-0300
synchronization and starts reception.
After receiving these bits, the SCIF carries out the following checks.
A. Stop bit check: The SCIF checks whether the stop bit is 1. If there are two stop bits, only
B. The SCIF checks whether receive data can be transferred from the receive shift register
C. Overrun check: The SCIF checks that the ORER flag is 0, indicating that the overrun error
D. Break check: The SCIF checks that the BRK flag is 0, indicating that the break state is not
If all the above checks are passed, the receive data is stored in SCFRDR.
Note: When a parity error or a framing error occurs, reception is not suspended.
data-full interrupt (RXIF) request is generated. If the RIE bit or the REIE bit in SCSCR is set
to 1 when the ER flag changes to 1, a receive-error interrupt (ERIF) request is generated. If the
RIE bit or the REIE bit in SCSCR is set to 1 when the BRK or ORER flag changes to 1, a
break reception interrupt (BRIF) request is generated.
Figure 16.9 shows an example of the operation for reception.
the first is checked.
(SCRSR) to SCFRDR.
has not occurred.
set.