DF70844AD80FPV Renesas Electronics America, DF70844AD80FPV Datasheet - Page 609

• Manufacturer Part Number: DF70844AD80FPV
• Description: IC SUPERH MCU FLASH 112LQFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7080r

Specifications of DF70844AD80FPV

• Core Size: 32-Bit
• Program Memory Size: 256KB (256K x 8)
• Core Processor: SH-2
• Speed: 80MHz
• Connectivity: EBI/EMI, FIFO, I²C, SCI, SSU
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 76
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• No. Of I/o's: 76
• Ram Memory Size: 16KB
• Cpu Speed: 80MHz
• Digital Ic Case Style: LQFP
• Supply Voltage Range: 3V To 3.6V, 4.5V To 5.5V
• Embedded Interface Type: I2C, SCI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: R0K570865S001BE - KIT STARTER FOR SH7086R0K570865S000BE - KIT STARTER FOR SH7086HS0005KCU11H - EMULATOR E10A-USB H8S(X),SH2(A)
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Outline of Complementary PWM Mode Operation:
In complementary PWM mode, 6-phase PWM output is possible. Figure 11.39 illustrates counter
operation in complementary PWM mode, and figure 11.40 shows an example of complementary
PWM mode operation.
1. Counter Operation
Counter value
TGRA_3
In complementary PWM mode, three counters—TCNT_3, TCNT_4, and TCNTS—perform
up/down-count operations.
TCNT_3 is automatically initialized to the value set in TDDR when complementary PWM
mode is selected and the CST bit in TSTR is 0.
When the CST bit is set to 1, TCNT_3 counts up to the value set in TGRA_3, then switches to
down-counting when it matches TGRA_3. When the TCNT3 value matches TDDR, the
counter switches to up-counting, and the operation is repeated in this way.
TCNT_4 is initialized to H'0000.
When the CST bit is set to 1, TCNT4 counts up in synchronization with TCNT_3, and
switches to down-counting when it matches TCDR. On reaching H'0000, TCNT4 switches to
up-counting, and the operation is repeated in this way.
TCNTS is a read-only counter. It need not be initialized.
When TCNT_3 matches TCDR during TCNT_3 and TCNT_4 up/down-counting, down-
counting is started, and when TCNTS matches TCDR, the operation switches to up-counting.
When TCNTS matches TGRA_3, it is cleared to H'0000.
When TCNT_4 matches TDDR during TCNT_3 and TCNT_4 down-counting, up-counting is
started, and when TCNTS matches TDDR, the operation switches to down-counting. When
TCNTS reaches H'0000, it is set with the value in TGRA_3.
TCNTS is compared with the compare register and temporary register in which the PWM duty
is set during the count operation only.
H'0000
TCDR
TDDR
Figure 11.39 Complementary PWM Mode Counter Operation
TCNT_4
TCNTS
TCNT_3
Section 11 Multi-Function Timer Pulse Unit 2 (MTU2)
Rev. 3.00 May 17, 2007 Page 551 of 1582
REJ09B0181-0300
TCNT_3
TCNT_4
TCNTS
Time