C8051F902-GM Silicon Laboratories Inc, C8051F902-GM Datasheet - Page 148

• Manufacturer Part Number: C8051F902-GM
• Description: IC MCU 8BIT 8KB FLASH 24QFN
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F9xxr

Specifications of C8051F902-GM

• Program Memory Type: FLASH
• Program Memory Size: 8KB (8K x 8)
• Package / Case: 24-QFN
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 16
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 0.9 V ~ 3.6 V
• Data Converters: A/D 15x10/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: C8051F9x
• Core: 8051
• Data Ram Size: 768 B
• Interface Type: UART
• Maximum Clock Frequency: 25 MHz
• Number Of Timers: 4
• Operating Supply Voltage: 0.9 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F912DK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit
• Package: 24QFN EP
• Device Core: 8051
• Family Name: C8051F90x
• Maximum Speed: 25 MHz
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 16
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1848-5

C8051F91x-C8051F90x
14.7. Determining the Event that Caused the Last Wakeup
When waking from idle mode, the CPU will vector to the interrupt which caused it to wake up. When wak-
ing from stop mode, the RSTSRC register may be read to determine the cause of the last reset.
Upon exit from suspend or sleep mode, the wake-up flags in the PMU0CF register can be read to deter-
mine the event which caused the device to wake up. After waking up, the wake-up flags will continue to be
updated if any of the wake-up events occur. Wake-up flags are always updated, even if they are not
enabled as wake-up sources.
All wake-up flags enabled as wake-up sources in PMU0CF must be cleared before the device can enter
suspend or sleep mode. After clearing the wake-up flags, each of the enabled wake-up events should be
checked in the individual peripherals to ensure that a wake-up event did not occur while the wake-up flags
were being cleared.
148
Rev. 1.0