UPD78F0890GK(A)-GAJ-AX NEC, UPD78F0890GK(A)-GAJ-AX Datasheet - Page 209

• Manufacturer Part Number: UPD78F0890GK(A)-GAJ-AX
• Description: 8BIT MCU, 128K FLASH, 7K RAM, LQFP
• Manufacturer: NEC

Specifications of UPD78F0890GK(A)-GAJ-AX

• Controller Family/series: UPD78F
• No. Of I/o's: 55
• Ram Memory Size: 7KB
• Cpu Speed: 20MHz
• No. Of Timers: 10
• No. Of Pwm: RoHS Compliant
• Core Size: 8bit
• Program Memory Size: 128KB
• Oscillator Type: External, Internal

7.4.5 Square-wave output operation
bit timer capture/compare register 00n (CR00n).
bit 0 (TOE0n) and bit 1 (TOC0n1) of 16-bit timer output control register 0n (TOC0n) to 1. This enables a square wave
with any selected frequency to be output.
The basic operation setting procedure is as follows.
<1> Set the count clock by using the PRM0n register.
<2> Set the CRC0n register (see Figure 7-47 for the set value).
<3> Set the TOC0n register (see Figure 7-47 for the set value).
<4> Set any value to the CR00n register (0000H cannot be set).
<5> Set the TMC0n register to start the operation (see Figure 7-47 for the set value).
A square wave with any selected frequency can be output at intervals determined by the count value preset to 16-
The TO0n pin output status is reversed at intervals determined by the count value preset to CR00n + 1 by setting
TMC0n
CRC0n
Setting
Caution CR00n cannot be rewritten during TM0n operation.
Remarks 1. For the setting of the TO0n pin, see 7.3 (5) Port mode register 0 (PM0) to (7) Port mode
7
0
7
0
2. For how to enable the INTTM00n interrupt, see CHAPTER 17 INTERRUPT FUNCTIONS.
register 13 (PM13).
6
0
6
0
Figure 7-47. Control Register Settings in Square-Wave Output Mode (1/2)
5
0
5
0
CHAPTER 7 16-BIT TIMER/EVENT COUNTERS 00 TO 03
4
0
4
0
(a) 16-bit timer mode control register 0n (TMC0n)
(b) Capture/compare control register 0n (CRC0n)
TMC0n3
1
3
0
TMC0n2
CRC0n2
0/1
1
User’s Manual U17554EJ4V0UD
TMC0n1
CRC0n1
0/1
0
CRC0n0
OVF0n
0
0
Clears and starts on match between TM0n and CR00n.
CR00n used as compare register
209