MCF5282CVM80 Freescale Semiconductor, MCF5282CVM80 Datasheet - Page 161

• Manufacturer Part Number: MCF5282CVM80
• Description: IC MPU 512K 80MHZ 256-MAPBGA
• Manufacturer: Freescale Semiconductor
• Series: MCF528xr

Specifications of MCF5282CVM80

• Core Processor: Coldfire V2
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, SPI, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 150
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-MAPBGA
• Controller Family/series: ColdFire
• Ram Memory Size: 64KB
• Embedded Interface Type: CAN, I2C, SPI, UART
• No. Of Pwm Channels: 8
• Digital Ic Case Style: MAPBGA
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

8.5.2
There are two modes of arbitration: fixed and round-robin. This section discusses the differences between
them.
8.5.2.1
Round-robin arbitration is the default mode after reset. This scheme cycles through the sequence of
masters as specified by MPARK[Mn_PRTY] bits. Upon completion of a transfer, the master is given the
lowest priority and the priority for all other masters is increased by one.
If no masters are requesting, the arbitration unit must “park”, pointing at one of the masters. There are two
possibilities, park the arbitration unit on the last active master, or park pointing to the highest priority
master. Setting MPARK[PRK_LAST] causes the arbitration pointer to be parked on the highest priority
master. In round-robin mode, programming the timeout enable and lockout bits MPARK[13,11:8] will
have no effect on the arbitration.
8.5.2.2
In fixed arbitration the master with highest priority (as specified by the MPARK[Mn_PRTY] bits) will win
the bus. That master will relinquish the bus when all transfers to that master are complete.
If MPARK[TIMEOUT] is set, a counter will increment for each master for every cycle it is denied access.
When a counter reaches the limit set by MPARK[LCKOUT_TIME], the arbitration algorithm will be
changed to round-robin arbitration mode until all locks are cleared. The arbitration will then return to fixed
mode and the highest priority master will be granted the bus.
As in round-robin mode, if no masters are requesting, the arbitration pointer will park on the highest
priority master if MPARK[PRK_LAST] is set, or will park on the master which last requested the bus if
cleared.
8.5.3
The MPARK controls the operation of the system bus arbitration module. The platform bus master
connections are defined as:
Freescale Semiconductor
•
•
•
•
next +1
next +2
next +3
Master 3 (M3): Fast Ethernet Controller (Not used for the MCF5216 and MCF5214)
Master 2 (M2): 4-channel DMA
Master 1 (M1): Internal Bus Master (not used in normal user operation)
Master 0 (M0): V2 ColdFire Core
Arbitration Algorithms
Bus Master Park Register (MPARK)
Round-Robin Mode
Fixed Mode
M3 = 11 M2 =01 M1 = 10 M0 = 00
M3 = 00 M2 =10 M1 = 11 M0 = 01
M3 = 01 M2 =11 M1 = 00 M0 = 10
M3 = 10 M2 =00 M1 = 01 M0 = 11
MCF5282 and MCF5216 ColdFire Microcontroller User’s Manual, Rev. 3
System Control Module (SCM)
8-9