PIC18C858-E/L Microchip Technology, PIC18C858-E/L Datasheet - Page 194

• Manufacturer Part Number: PIC18C858-E/L
• Description: IC MCU OTP 16KX16 CAN 84PLCC
• Manufacturer: Microchip Technology
• Series: PIC® 18Cr

Specifications of PIC18C858-E/L

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 68
• Program Memory Size: 32KB (16K x 16)
• Program Memory Type: OTP
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 84-PLCC
• For Use With: AC164310 - MODULE SKT FOR PM3 84PLCCDVA18XL840 - ADAPTER DEVICE ICE 84PLCCAC174012 - MODULE SKT PROMATEII 84PLCC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Other names: PIC18C858E/L

PIC18CXX8
17.2.3
This section shows the Receive Buffer registers with its
associated control registers.
REGISTER 17-12: RXB0CON – RECEIVE BUFFER 0 CONTROL REGISTER
DS30475A-page 194
CAN RECEIVE BUFFER REGISTERS
bit 7
bit 6-5
bit 4
bit 3
bit 2
bit 1
bit 0
bit 7
RXFUL: Receive Full Status bit
1 = Receive buffer contains a received message
0 = Receive buffer is open to receive a new message
RXM1:RXM0: Receive Buffer Mode bits
11 = Receive all messages (including those with errors)
10 = Receive only valid messages with extended identifier
01 = Receive only valid messages with standard identifier
00 = Receive all valid messages
Unimplemented: Read as ’0’
RXRTRRO: Receive Remote Transfer Request Read Only bit
1 = Remote transfer request
0 = No remote transfer request
RXB0DBEN: Receive Buffer 0 Double Buffer Enable bit
1 = Receive Buffer 0 overflow will write to Receive Buffer 1
0 = No Receive Buffer 0 overflow to Receive Buffer 1
JTOFF: Jump Table Offset bit (read only copy of RX0DBEN)
1 = Allows Jump Table offset between 6 and 7
0 = Allows Jump Table offset between 1 and 0
FILHIT0: Filter Hit bit
This bit indicates which acceptance filter enabled the message reception into receive buffer 0
1 = Acceptance Filter 1 (RXF1)
0 = Acceptance Filter 0 (RXF0)
Legend:
R = Readable bit
- n = Value at POR
RXFUL
R/C-0
Note:
Note:
This bit is set by the CAN module and should be cleared by software after the buffer
is read.
This bit allows same filter jump table for both RXB0CON and RXB1CON.
R/W-0
RXM1
Advanced Information
R/W-0
RXM0
W = Writable bit
’1’ = Bit is set
U-0
—
RXRTRRO RXB0DBEN
R-0
U = Unimplemented bit, read as ‘0’
’0’ = Bit is cleared
R/W-0
2000 Microchip Technology Inc.
x = Bit is unknown
JTOFF
R-0
FILHIT0
R/W-0
bit 0