IXB28504XGBEFS Intel, IXB28504XGBEFS Datasheet - Page 196

• Manufacturer Part Number: IXB28504XGBEFS
• Manufacturer: Intel

Specifications of IXB28504XGBEFS

• Lead Free Status / Rohs Status: Compliant

Note:
A.2.38
Note:
Intel NetStructure
TPS
196
®
The
memory.
Example
fru addrecord -c bb -r 0xC0 -m 0x23 -t 0x01 48
fru delmrecord
Deletes the specified record from the specified FRU.
Syntax
fru delmrecord -c <component> -n <mrec_index>
Parameters
The
memory. The command is rejected if the specified record is the last remaining record in
the FRU.
Example
fru delmrecord -c bb -n 5
• -r <record type> - New record type (for example, 0xC0 for OEM records)
• -m <mfg id> - OEM manufacturer’s code; three bytes wide (for example, 0x12ab56
• -t <record id> - OEM record ID
• -l <length> - Total record length, including record header. The total length must be
• -c <component> - The FRU to operate on. Valid values are:
• -n <mrec_index> - Index of the multirecord to be updated; counted from 1
IXB2850 Packet Processing Boards
gives the manufacturer’s code byte string “56 ab 12”)
>= 9 (which is the combined length of the record header and the OEM record
header)
cfg save
cfg save
— npmod - Network processor module
— rtm - Rear transition module
— ap - Adjunct Processor (AP)
— bb - Baseboard
— db1 - Media mezzanine card 1 (not used on IXB2850 boards)
— db2 - Media mezzanine card 2
— ap - Adjunct processor card
— mic1 - Media interface card 1 (not used on IXB2850 boards)
— mic2 - Media interface card 2
— fic - Fabric interface card
— npmod - Network processor module
— rtm - Rear transition module
— ap - Adjunct Processor (AP)
command must be issued to save any changes made to non-volatile
command must be issued to save any changes made to non-volatile
IXB2850—Boot Monitor Console Commands
Document Number: 05-2443-006
January 2007