IXB28504XGBEFS Intel, IXB28504XGBEFS Datasheet - Page 151

• Manufacturer Part Number: IXB28504XGBEFS
• Manufacturer: Intel

Specifications of IXB28504XGBEFS

• Lead Free Status / Rohs Status: Compliant

Maintenance—IXB2850
11.3.2.7
11.4
January 2007
Document Number: 05-2443-006
fis image
The fis image command is used to upgrade the Recovery Loader.
Remote NPU Firmware Upgrade
This section describes the IPMI interface between the SSU Agent and the SSU Manager
that is used during the remote safe software upgrade procedure. The sequence
diagram in
1. Get information about images currently stored and/or running on the network
2. Request an upgrade of the selected image by downloading a new image file from a
3. Mark the newly downloaded image for one-shot test mode.
4. Reboot the board.
5. Verify that the new image has booted correctly and validate the new image.
• partition - The name of the partition into which the specified image is to be burned
processor.
remote location.
— target - Target application image
— diag - Diagnostics image
Figure 43
shows a typical image upgrade procedure:
Intel NetStructure
®
IXB2850 Packet Processing Boards
TPS
151