ATMEGA128RZBV-8AU Atmel, ATMEGA128RZBV-8AU Datasheet - Page 129

• Manufacturer Part Number: ATMEGA128RZBV-8AU
• Description: MCU ATMEGA1280/AT86RF230 100TQFP
• Manufacturer: Atmel
• Series: ATMEGAr

Specifications of ATMEGA128RZBV-8AU

• Frequency: 2.4GHz
• Data Rate - Maximum: 2Mbps
• Modulation Or Protocol: 802.15.4 Zigbee
• Applications: General Purpose
• Power - Output: 3dBm
• Sensitivity: -101dBm
• Voltage - Supply: 1.8 V ~ 3.6 V
• Data Interface: PCB, Surface Mount
• Memory Size: 128kB Flash, 4kB EEPROM, 8kB RAM
• Antenna Connector: PCB, Surface Mount
• Package / Case: 100-TQFP
• Wireless Frequency: 2.4 GHz
• Interface Type: JTAG, SPI
• Output Power: 3 dBm
• For Use With: ATAVRISP2 - PROGRAMMER AVR IN SYSTEMATSTK501 - ADAPTER KIT FOR 64PIN AVR MCUATSTK500 - PROGRAMMER AVR STARTER KIT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Operating Temperature: -
• Current - Transmitting: -
• Current - Receiving: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: ATmega128

15.9
15.9.1
2549M–AVR–09/10
Register Description
TCCR0A – Timer/Counter Control Register A
• Bits 7:6 – COM0A1:0: Compare Match Output A Mode
These bits control the Output Compare pin (OC0A) behavior. If one or both of the COM0A1:0
bits are set, the OC0A output overrides the normal port functionality of the I/O pin it is connected
to. However, note that the Data Direction Register (DDR) bit corresponding to the OC0A pin
must be set in order to enable the output driver.
When OC0A is connected to the pin, the function of the COM0A1:0 bits depends on the
WGM02:0 bit setting.
are set to a normal or CTC mode (non-PWM).
Table 15-2.
Table 15-3
mode.
Table 15-3.
Note:
Table 15-4 on page 130
to phase correct PWM mode.
Bit
0x24 (0x44)
Read/Write
Initial Value
COM0A1
COM0A1
0
0
1
1
0
0
1
1
1. A special case occurs when OCR0A equals TOP and COM0A1 is set. In this case, the Com-
pare Match is ignored, but the set or clear is done at BOTTOM. See
page 124
shows the COM0A1:0 bit functionality when the WGM01:0 bits are set to fast PWM
Compare Output Mode, non-PWM Mode
Compare Output Mode, Fast PWM Mode
COM0A1
R/W
COM0A0
COM0A0
7
0
for more details.
0
1
0
1
0
1
0
1
Table 15-2
COM0A0
shows the COM0A1:0 bit functionality when the WGM02:0 bits are set
R/W
6
0
ATmega640/1280/1281/2560/2561
shows the COM0A1:0 bit functionality when the WGM02:0 bits
COM0B1
R/W
WGM02 = 0: Normal Port Operation, OC0A Disconnected.
5
0
Clear OC0A on Compare Match, set OC0A at BOTTOM
Set OC0A on Compare Match, clear OC0A at BOTTOM
WGM02 = 1: Toggle OC0A on Compare Match.
Normal port operation, OC0A disconnected.
Normal port operation, OC0A disconnected.
COM0B0
R/W
4
0
Toggle OC0A on Compare Match.
Clear OC0A on Compare Match.
Set OC0A on Compare Match.
(non-inverting mode).
R
(inverting mode).
3
–
0
(1)
Description
Description
R
2
–
0
WGM01
R/W
1
0
“Fast PWM Mode” on
WGM00
R/W
0
0
TCCR0A
129