ATXMEGA32A4-CUR Atmel, ATXMEGA32A4-CUR Datasheet - Page 273

• Manufacturer Part Number: ATXMEGA32A4-CUR
• Description: MCU AVR 32+4 FLASH 49VFBGA
• Manufacturer: Atmel
• Series: AVR® XMEGAr

Specifications of ATXMEGA32A4-CUR

• Core Processor: AVR
• Core Size: 8/16-Bit
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 34
• Program Memory Size: 32KB (16K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 2K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.6 V ~ 3.6 V
• Data Converters: A/D 12x12b, D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 49-VFBGA
• For Use With: ATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMRATSTK600 - DEV KIT FOR AVR/AVR32770-1007 - ISP 4PORT ATMEL AVR MCU SPI/JTAG770-1004 - ISP 4PORT FOR ATMEL AVR MCU SPI
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

24.7.2
24.8
8077H–AVR–12/09
SDRAM Configuration
Multiplexing Data with Address Byte 0 and 1
When the data byte and address byte 0 (AD[7:0]), and address byte 1 (A[15:8]) are multiplexed,
they are output from the same port, and the ALE1 and ALE2 signal from the device control the
external address latches.
Figure 24-7. Multiplexed SRAM LPC connection using ALE1 and ALE2
Chip Select 3 on the EBI can be configured from SDRAM operation, and the EBI must be config-
ured for 3-Port or 4-Port interface. The SDRAM can be configured for 4-bit or 8-bit data bus, and
4-Port interface must be used for 8-bit data bus. The SDRAM interface signals from the EBI to
the SDRAM is listed in
Table 24-2.
Signal
CS
WE
RAS
CAS
DQM
CKE
CLK
BA[1:0]
A[12:0]
A[10]
D[7:0]
SDRAM Interface signals
EBI
Description
Chip Select
Write Enable
Row Address Strobe
Column Address Strobe
Data Mask Signal/ Output Enable
Clock Enable
Clock
Bank Address
Address bus
Precharge
Data bus
Table 24-2 on page
A[19:16]
A[15:8]/
AD[7:0]
ALE1
ALE2
D
G
273.
Q
D
G
Q
D[7:0]
A[7:0]
A[15:8]
A[19:16]
SRAM
XMEGA A
273