MC68HC08AZ60ACFU MOTOROLA [Motorola, Inc], MC68HC08AZ60ACFU Datasheet - Page 378

no-image

MC68HC08AZ60ACFU

Manufacturer Part Number
MC68HC08AZ60ACFU
Description
Microcontrollers
Manufacturer
MOTOROLA [Motorola, Inc]
Datasheet
MSCAN08 Controller (MSCAN08)
Advance Information
378
SLPRQ — Sleep Request, Go to Internal Sleep Mode
SFTRES — Soft Reset
This flag requests the MSCAN08 to go into an internal power-saving
mode (see
When this bit is set by the CPU, the MSCAN08 immediately enters the
soft reset state. Any ongoing transmission or reception is aborted and
synchronization to the bus is lost.
The following registers enter and stay in their hard reset state:
CMCR0, CRFLG, CRIER, CTFLG, and CTCR.
The registers CMCR1, CBTR0, CBTR1, CIDAC, CIDAR0–3, and
CIDMR0–3 can only be written by the CPU when the MSCAN08 is in
soft reset state. The values of the error counters are not affected by
soft reset.
When this bit is cleared by the CPU, the MSCAN08 tries to
synchronize to the CAN bus. If the MSCAN08 is not in bus-off state,
it will be synchronized after 11 recessive bits on the bus; if the
MSCAN08 is in bus-off state, it continues to wait for 128 occurrences
of 11 recessive bits.
Clearing SFTRES and writing to other bits in CMCR0 must be in
separate instructions.
1 = Sleep — The MSCAN08 will go into internal sleep mode.
0 = Wakeup — The MSCAN08 will function normally.
1 = MSCAN08 in soft reset state
0 = Normal operation
MSCAN08 Controller (MSCAN08)
MSCAN08 Sleep Mode
on page 361).
MC68HC08AZ60A — Rev 0.0
MOTOROLA

Related parts for MC68HC08AZ60ACFU