h8s-2635 Renesas Electronics Corporation., h8s-2635 Datasheet - Page 1050

• Manufacturer Part Number: h8s-2635
• Description: Renesas 16-bit Single-chip Microcomputer H8s Family/h8s/2600 Series
• Manufacturer: Renesas Electronics Corporation.

Section 23B Power-Down Modes [HD64F2636UF, HD6432636UF, HD64F2638UF,
HD6432638UF, HD64F2638WF, HD6432638WF, HD64F2639UF, HD6432639UF, HD64F2639WF,
HD6432639WF, HD64F2630UF, HD6432630UF, HD64F2630WF, HD6432630WF]
Exiting Sleep Mode by
stipulated reset input duration, driving the
exception processing.
Exiting Sleep Mode by
to hardware standby mode.
23B.5 Module Stop Mode
23B.5.1 Module Stop Mode
Module stop mode can be set for individual on-chip supporting modules.
When the corresponding MSTP bit in MSTPCR is set to 1, module operation stops at the end of
the bus cycle and a transition is made to module stop mode. The CPU continues operating
independently.
Table 23B-5 shows MSTP bits and the corresponding on-chip supporting modules.
When the corresponding MSTP bit is cleared to 0, module stop mode is cleared and the module
starts operating at the end of the bus cycle. In module stop mode, the internal states of modules
other than the SCI, Motor control PWM, A/D converter and HCAN are retained.
After reset clearance, all modules other than DTC are in module stop mode.
When an on-chip supporting module is in module stop mode, read/write access to its registers is
disabled.
Rev. 6.00 Feb 22, 2005 page 990 of 1484
REJ09B0103-0600
R E S
S T B Y
pin: Setting the
Pin: When the
R E S
R E S
S T B Y
pin High starts the CPU performing reset
pin level Low selects the reset state. After the
pin level is driven Low, a transition is made