FX1S-30MR-ES/UL MITSUBISHI, FX1S-30MR-ES/UL Datasheet - Page 365

• Manufacturer Part Number: FX1S-30MR-ES/UL
• Description: PLC, 16 IN, 14 RELAY OUT, 110V/2
• Manufacturer: MITSUBISHI

Specifications of FX1S-30MR-ES/UL

• No. Of Analogue Inputs: 16
• No. Of Analogue Outputs: 14
• Ip/nema Rating: IP10
• Approval Bodies: CE, CUL, UL
• External Depth: 49mm
• External Length / Height: 90mm
• External Width: 60mm
• Mounting Type: Panel

10.19.6 Automatic Backlight OFF
10.19.7 Error display enable / disable
FX Series Programmable Controllers
Using this function a set time until the backlight is switched OFF can be set, or it can be forced
ON and OFF when necessary.
D +2 can be set in the following range;
0 (initial value) : 10 minutes
1 to 240 : 1 to 240 minutes
240 or more : 240 minutes
Negative value : Forced OFF
Points to note;
a)Once the backlight turns OFF, it will turn ON again when any key is pressed. This key will act
b)Setting a Negative value in D +2 will force the backlight OFF, setting M
Users can specify the types of errors in the PLC to be displayed on the 5DM unit.
The following errors are unconditionally displayed when they occur;
PLC Hardware, parameter, grammatical and circuit errors.
While
I/O configuration, parallel link and operation errors.
When any key is pressed, or when the error status is released the error display dissappears.
If two or more errors have occured, the priority is given to errors to be unconditionally
displayed. Additionally the error with the smallest ‘error number’ has overall proirity.
D8158
K
D8159
K
D8159
K
Special D
Special D
as a trigger, not an effective key. The contents displayed before the backlight OFF, will them
be shown.
can be forced ON.
M +3
is ON, the following errors are also displayed;
D +2
M +2
M +3
Control device
Control device
Backlight OFF time
Disable automatic backlight OFF (Forced ON)
Enable / Disable operation errors etc.
Description
Description
Points Of Technique 10
+2 the backlight
10-33