FX1S-30MR-ES/UL MITSUBISHI, FX1S-30MR-ES/UL Datasheet - Page 350

• Manufacturer Part Number: FX1S-30MR-ES/UL
• Description: PLC, 16 IN, 14 RELAY OUT, 110V/2
• Manufacturer: MITSUBISHI

Specifications of FX1S-30MR-ES/UL

• No. Of Analogue Inputs: 16
• No. Of Analogue Outputs: 14
• Ip/nema Rating: IP10
• Approval Bodies: CE, CUL, UL
• External Depth: 49mm
• External Length / Height: 90mm
• External Width: 60mm
• Mounting Type: Panel

10.14 Communication Format
10.14.1 Specification of the communication parameters:
FX Series Programmable Controllers
Items such as baud rates, stop bits and parities must be identically set between the two
communicating devices. The communication parameters are selected by a bit pattern which is
stored in data register D8120.
General note regarding the use of Data register D8120:
This data register is a general set-up register for all ADP type communications. Bits 13 to 15 in
the 232ADP units should not be used. When using the FX-485 network with 485ADP units bits
13 to 15 should be used instead of bits 8 to 12.
b10
b11
b12
b13
b14
b15
b0
b1
b2
b3
b4
b5
b6
b7
b8
b9
Communication Control
page 10-20 onwards)
(see timing diagrams
Network
Terminator character
FX-485
Header character
Baud rate - bps
Parity (b2, b1)
Data length
Description
Stop bits
Protocol
Protocol
Check
Sum
(00): No parity
(01): Odd parity
(11): Even parity
(b7, b6, b5, b4)
(0011): 300 bps
(0100): 600 bps
(0101): 1200 bps
(0110): 2400 bps
No Protocol
(b12, b11, b10)
(0, 0, 0): RS Instruction is not being used (RS232C interface)
(0, 0, 1): Terminal mode -RS232C interface
(0, 1, 0): Interlink mode - RS232C interface (FX2N V2.00 or above)
(0, 1, 1): Normal mode 1- RS232C, RS485(422) interfaces (RS485
FX2N(C) only)
(1, 0, 1): Normal Mode 2 - RS232C interface (FX only)
Computer Link
(b12, b11, b10)
(0, 0, 0): RS485(422) interface
(0, 1, 0): RS232C interface
No protocol
No Check
Format 1
0 (OFF)
7 bits
None
None
1 bit
D8120
Bit (bn)status
(b7, b6, b5, b4)
(0111): 4800 bps
(1000): 9600 bps
(1001): 19200 bps
D8124, Default: STX (02H)
D8125, Default: ETX (03H)
Added automatically
Dedicated Protocol
Points Of Technique 10
Format 4
1 (ON)
8 bits
2bits
10-18