FX1S-30MR-ES/UL MITSUBISHI, FX1S-30MR-ES/UL Datasheet - Page 364

• Manufacturer Part Number: FX1S-30MR-ES/UL
• Description: PLC, 16 IN, 14 RELAY OUT, 110V/2
• Manufacturer: MITSUBISHI

Specifications of FX1S-30MR-ES/UL

• No. Of Analogue Inputs: 16
• No. Of Analogue Outputs: 14
• Ip/nema Rating: IP10
• Approval Bodies: CE, CUL, UL
• External Depth: 49mm
• External Length / Height: 90mm
• External Width: 60mm
• Mounting Type: Panel

10.19.5 Specified device edit
FX Series Programmable Controllers
This function allows the operator to edit the devices displayed by the specified device monitor.
The following devices are used to achieve this.
Points to note;
a)In order to edit a device while it is being displayed, the control device M
b)When the edit request is turned ON, bit devices Y, M and S can be set or reset. Also the
• Bit devices - A cursor under the device flickers, pressing [OK] sets or resets the device. The
• Word devices - The current value flickers, pressing the [+] or [-] keys will increment or
c)If the [+] and [-] keys are used for device scrolling, when the current or set value is increased
D8159
K
Special D
If the edit request turns OFF, the function is disabled. In order to prevent this, it is recommended to
drive M using a set command.
current and set values of word devices D, T and C can be edited.
[ESC] key signifies the end of the change process,
decrement the current value.
Pressing the [OK] key before the [+] or [-] keys in the case of T or C, allows the set values to
be changed.
Pressing the [OK] key after a value change, completes the change. Pressing the [ESC] key
cancels the change and completes the process, for either key
reset.
or decreased for editing purposes, the program for timer scroll will be actuated. For this
combination of functions please set an interlock in the sequencer program.
M
M +1
Control device
Request to edit displayed device data
Edit complete response signal
M +1 set OFF and M is reset
Description
M +1
is set to OFF and M
Points Of Technique 10
should be ON.
10-32
.
is