PEB 4364 T V1.2 Infineon Technologies, PEB 4364 T V1.2 Datasheet - Page 142

• Manufacturer Part Number: PEB 4364 T V1.2
• Description: IC SLIC VOICE ACCESS PDSO-36
• Manufacturer: Infineon Technologies
• Series: DuSLICr

Specifications of PEB 4364 T V1.2

• Function: Dual Channel Subscriber Line Interface Circuit (DuSLIC)
• Interface: IOM-2, PCM
• Number Of Circuits: 2
• Voltage - Supply: 3.3 V ~ 5 V
• Current - Supply: 105mA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 36-PDSO
• Includes: DTMF Generator and Decoder, Line Echo Cancellation (LEC), Teletax (TTX) Generation, Universal Tone Detection (UTD)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power (watts): -
• Other names: PEB4364TV1.2XT; SP000007728

Structure of the Second Command Byte
The second command byte specifies a particular SOP, COP, or POP command,
depending on the CMD[2:0] bits of the first command byte. In the following sections, the
contents of this register are described for each command group.
The second command byte specifies the initial offset for the subsequent data bytes. After
each data byte is transferred, the internal offset is incremented automatically. Therefore,
it is possible to send a varied number of data bytes with one SOP, COP, or POP
command. Writing over read-only registers will not destroy their contents.
Register Description Example
At the beginning of each register description, a single line gives information about:
•
•
•
•
•
•
The line is organized as follows (with example):
Offset
27
Preliminary Data Sheet
H
Offset: Offset of register address (hex)
Name: Short name of the register
Detailed Name: Detailed name of the register
Reset Value: Value of the register after reset (hex)
Test Status:
Channel Selection:
Name
TSTR1
CMD[2:0] = 1 1 0
CMD[2:0] = 1 1 1
Detailed Name
Test Register 1
“hw” – value depends on specific hardware fuses
“T” – the register has no effect unless the TEST-EN bit in
register LMCR1 is set to 1
“N” – the register affects both SLICOFI-2x channels,
“Y” – the register affects a specific SLICOFI-2x channel
POP command (Signal Processing Operation
Programming).
Reserved for production tests
SLICOFI-2x Command Structure and Programming
142
Reset
Value
00
H
Test
T
DS3, 2003-07-11
Per
Channel
Y
DuSLIC