3F88L-CR002C Omron, 3F88L-CR002C Datasheet - Page 86

• Manufacturer Part Number: 3F88L-CR002C
• Description: CABLE RESOLVER FOR RS17/T 2M
• Manufacturer: Omron

Specifications of 3F88L-CR002C

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 3F88LCR002C

Operation
D Deleting by Bank Number
3-34
Operation
Operation
CLR
CAM/
PRMTR
BANK/
FUN
SET
CLR
Display
Display
Press the Cam/Parameter Key and set the cam number that is
to be deleted.
The Cam/Parameter No. display will change as shown below
when the Cam/Parameter Key is pressed.
1→2→3→...→15→16→1→ etc.
Keep pressing the Cam/Parameter Key until the
cam/parameter number to be deleted is displayed.
Note For the 3F88L-162 (32-point model) Cam Positioner, the
Press the Clear Key twice to delete the displayed cam number.
The cam number display will start flashing when the Clear Key
is pressed twice (which means the cam number is ready to be
deleted).
Note If the Clear Key is pressed once, the ON and OFF angle
While the cam number display is flashing, press the Set Key to
delete the cam number that is flashing.
Once the cam number has been deleted, the ON and OFF
angle display will be “-- -- --” (which means data can be input).
Set the mode selection switch to PRGM mode.
The data for step 1 of the displayed bank and cam numbers
will be displayed.
Note If there is no data, the display will be “-- -- --.”
Press the Bank/Function Key and set the bank number that is
to be deleted.
The Bank/Function display will change as shown below each
time the Bank/Function Key is pressed.
1→2→3→4→5→6→7→8→1 etc.
Keep pressing the Bank/Function Key until the bank number to
be deleted appears.
Note When the resolution is set to 720 (divisions/rotation), the
numbers displayed will continue to “32” and then return
to “1.”
display will start flashing (which means the step is ready
to be deleted). If the Clear Key is pressed three times,
the bank number will start flashing (which means that
that bank number is ready to be deleted). If the Clear
Key is pressed four times, the display will return to the
original display (nothing will be deleted).
display will not include 5→6→7→8.
Explanation
Explanation
Chapter 3