3F88L-CR002C Omron, 3F88L-CR002C Datasheet - Page 7

• Manufacturer Part Number: 3F88L-CR002C
• Description: CABLE RESOLVER FOR RS17/T 2M
• Manufacturer: Omron

Specifications of 3F88L-CR002C

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 3F88LCR002C

Installation Precautions
Conformance to EC Directives
H Applicable Directives
Concepts
Note Applicable EMC (Electromagnetic Compatibility) standards are as follows:
!
!
!
Caution
Caution
Caution
EMC Directives
EMC Directives stipulate that the system must comply with both EMS and EMI standards
(see the following note). Because OMRON devices are designed for installation in various
equipment or machines, they comply with the relevant EMC standards so that the equip-
ment or machines can easily comply with the EMC standards. However, the systems used
by customers are diverse, and EMC-related performance of the OMRON devices that com-
ply with EC Directives will vary depending on the configuration, wiring, and other conditions
of the equipment or control panel in which the OMRON devices are installed. The customer
must, therefore, perform final checks to confirm that devices and the overall machine con-
form to EMC standards.
EMS (Electromagnetic Susceptibility):
EMI (Electromagnetic Interference):
Low Voltage Directive
Always ensure that devices operating at voltages of 50 to 1,000 V AC or 75 to 1,500 V DC
meet the required safety standards (EN61131-2).
Install the Unit properly as specified in the operation manual.
Do not install the Unit in the following locations.
S Locations subject to direct sunlight.
S Locations subject to temperatures or humidity outside the range specified in the
S Locations subject to condensation as the result of severe changes in temperature.
S Locations subject to corrosive or flammable gases.
S Locations subject to dust (especially iron dust) or salts.
S Locations subject to exposure to water, oil, or chemicals.
S Locations subject to shock or vibration.
Take appropriate and sufficient countermeasures when installing the Unit in the fol-
lowing locations.
S Locations subject to static electricity or other forms of noise.
S Locations subject to strong electromagnetic fields and magnetic fields.
S Locations subject to possible exposure to radioactivity.
S Locations close to power supplies.
S EMC Directives
S Low Voltage Directive
specifications.
(Radiated emission: 10-m regulations)
EN61131-2
EN50081-2