3F88L-CR002C Omron, 3F88L-CR002C Datasheet - Page 85

• Manufacturer Part Number: 3F88L-CR002C
• Description: CABLE RESOLVER FOR RS17/T 2M
• Manufacturer: Omron

Specifications of 3F88L-CR002C

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 3F88LCR002C

Operation
D Deleting by Cam Number
Operation
Operation
CAM/
PRMTR
BANK/
FUN
CLR
SET
SET
Display
Display
Press the Cam/Parameter Key and set the cam number that
contains the step to be deleted.
The Cam/Parameter No. display will change as shown below
when the Cam/Parameter Key is pressed.
1→2→3→...→15→16→1→ etc.
Keep pressing the Cam/Parameter Key until the
cam/parameter number to be set is displayed.
Note For the 3F88L-162 (32-point model) Cam Positioner, the
Press the Set Key to display the step to be deleted.
Press the Set Key to display the cam program steps in order.
Keep pressing the Set Key until the step to be deleted appears.
When the display is blank (“-- -- --”), press the Set Key to return
to step 1.
Press the Clear Key to delete the step that is displayed
If the Clear Key is pressed once, the ON angle and OFF angle
displays will start flashing (which means the step is ready to be
deleted).
Note If the Clear Key is pressed twice, the cam number will
Press the Set Key while the ON and OFF angle displays are
flashing, and that step will be deleted.
Once the step has been deleted, the final step for that cam
number (”-- -- --”) will be displayed (ready for input).
Set the mode selection switch to PRGM mode.
The data for step 1 of the bank and cam numbers displayed
will be displayed.
Note If there is no data, the display will be “-- -- --.”
Press the Bank/Function Key and set the bank number that
contains the cam number to be deleted.
The Bank/Function display will change as shown below each
time the Bank/Function Key is pressed.
1→2→3→4→5→6→7→8→1 etc.
Keep pressing the Bank/Function Key until the bank number to
be set appears.
Note When the resolution is set to 720 (divisions/rotation), the
numbers displayed will continue to “32” and then return
to “1.”
start flashing (which means that cam number is ready to
be deleted. If the Clear Key is pressed three times, the
bank number will start flashing (which means that that
bank number is ready to be deleted). If the Clear Key is
pressed four times, the display will return to the original
display (nothing will be deleted).
display will not include 5→6→7→8.
Explanation
Explanation
Chapter 3
3-33