DS3141+ Maxim Integrated Products, DS3141+ Datasheet - Page 33

• Manufacturer Part Number: DS3141+
• Description: IC FRAMER DS3/E3 SNGL 144CSBGA
• Manufacturer: Maxim Integrated Products

Specifications of DS3141+

• Controller Type: DS3/E3 Framer
• Interface: LIU
• Voltage - Supply: 3.135 V ~ 3.465 V
• Current - Supply: 80mA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 144-CSBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Bit 3: DS3/E3 Transmit Alarm-Indication Signal (TAIS). When this bit is logic 1 in DS3 mode, the transmitter
generates DS3 AIS, which is a properly F-bit and M-bit framed 1010... data pattern with both X bits set to 1, all C
bits set to 0, and the proper P bits. When this bit is logic 1 in E3 mode, the transmitter generates an unframed all-
ones pattern. When this bit is logic 0, normal data is transmitted.
Bit 4: DS3/E3 Transmit Remote Alarm Indication (TRAI). When this bit is logic 1 in DS3 mode, both X bits of
each DS3 frame are set to logic 0. When this bit is logic 1 in E3 mode, the RAI bit (bit 11 of each E3 frame) is set to
logic 1. When this bit is logic 0 in DS3 mode, both X bits are set to logic 1. When this bit is logic 0 in E3 mode, the
RAI bit is set to logic 0.
Bit 5: Transmit DS3 Idle Signal Enable (T3IDLE). When this bit is logic 1 in DS3 mode, the transmitter generates
the DS3 idle signal instead of the normal transmit data. The DS3 idle signal is defined as a normally DS3 framed
pattern (i.e., with the proper F bits and M bits along with the proper P bits) where the information bit fields are
completely filled with a data pattern of 1100..., the C bits in Subframe 3 are set to logic 0, and both X bits are set to
logic 1. In C-Bit Parity mode, the PMDL and FEAC channels are still enabled. This bit is ignored in the E3 mode.
Bits 6, 7: E3 National Bit Control (E3SnC[1:0]). These bits determine the source of the E3 National bit (Sn). On
the receive side, the Sn bit is always routed to the
controller. These bits are ignored in DS3 mode.
E3SnC1
0
0
1
1
0 = do not transmit AIS
1 = transmit AIS
0 = do not transmit RAI
1 = transmit RAI
0 = do not transmit DS3 idle signal
1 = transmit DS3 idle signal
E3SnC0
0
1
0
1
Force the Sn bit to logic 1
Source the Sn bit from the HDLC controller
Source the Sn bit from the FEAC controller
Force the Sn bit to logic 0
SOURCE OF THE E3 NATIONAL BIT (Sn)
T3E3IR
33 of 88
register as well as the HDLC controller and the FEAC