HD6417727BP100BV Renesas Electronics America, HD6417727BP100BV Datasheet - Page 567

• Manufacturer Part Number: HD6417727BP100BV
• Description: IC SUPERH MPU ROMLESS 240BGA
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417727BP100BV

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 100MHz
• Connectivity: FIFO, SCI, SIO, SmartCard, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 104
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.6 V ~ 2.05 V
• Data Converters: A/D 6x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 240-BGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -

17.3
17.3.1
For serial communication, the SCI has an asynchronous mode in which characters are
synchronized individually, and a clock synchronous mode in which communication is
synchronized with clock pulses.
Asynchronous/clock synchronous mode and the transmission format are selected in the serial
mode register (SCSMR), as listed in table 17.9. The SCI clock source is selected by the
combination of the C/A bit in the serial mode register (SCSMR) and the CKE1 and CKE0 bits in
the serial control register (SCSCR), as listed in table 17.10.
Asynchronous Mode:
• Data length is selectable: seven or eight bits.
• Parity and multiprocessor bits are selectable. So is the stop bit length (one or two bits). The
• In receiving, it is possible to detect framing errors, parity errors, overrun errors and breaks.
• An internal or external clock can be selected as the SCI clock source.
Clock Synchronous Mode:
• The transmission/reception format has a fixed eight-bit data length.
• In receiving, it is possible to detect overrun errors.
• An internal or external clock can be selected as the SCI clock source.
combination of the preceding selections constitutes the communication format and character
length.
⎯ When an internal clock is selected, the SCI operates using the on-chip baud rate generator,
⎯ When an external clock is selected, the external clock input must have a frequency 16 times
⎯ When an internal clock is selected, the SCI operates using the on-chip baud rate generator,
⎯ When an external clock is selected, the SCI operates on the input synchronous clock. The
and can output a serial clock signal with a frequency matching the bit rate.
the bit rate. (The on-chip baud rate generator is not used.)
and outputs a synchronous clock signal to external devices.
on-chip baud rate generator is not used.
Operation
Overview
Section 17 Serial Communication Interface (SCI)
Rev.6.00 Mar. 27, 2009 Page 509 of 1036
REJ09B0254-0600